Bullet Resistant Acrylic sheets offers a lightweight, crystal clear, non-laminated alternative for your protective barrier designs. It’s half the weight of bullet resistant glass of the same UL class rating, and meets UL 752, Level I, II, And III requirements for use in bullet-resistant applications involving small firearms. It is also available with an abrasion resistant coating and offers 40 times better abrasion resistance of un-coated acrylic. All levels meet Building Class CC@, Federal Specification L.P. 391D and ASTM D 4802.Despite all of the improvements in security technology, bullet resistant barriers have been proven to be the only measure that deters crime before it happens. This is especially important considering there is approximately one convenience store robbery for every two convenience stores in the U.S. and that bank robberies have increased by 136 times in the past 50 years.Level II is a thin, light, crystal clear protection against high-power handguns. It protects against handguns such as .357 magnum and others with a muzzle energy of 548 to 663 foot-pounds. On Level II the abrasion resistant coating comes standard.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
Acrylic
Available In
Sheet
Certifications
ITAR Registered
Start Your Quote
Send us a message:
*Required Fields
Type | Size | Length | Color |
---|---|---|---|
Sheet | 1.378″ | 4′ x 6′ up to 6′ x 10′ | Clear |
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
Physical Properties | Units | ASTM | Results |
---|---|---|---|
Ballistic Properties | UL 752 | .357 Magnum |
Mechanical Properties | Units | ASTM | Results |
---|---|---|---|
Thickness | 1.378in | ||
Weight | 8.5 # / sq ft | ||
Abrasion Resistance | Cycles | 0.2 to 2.0 (% haze change) | |
Tensile Strength | ASTM D638 | 9,500 psi | |
Tensile Modulus | ASTM D638 | 400,000 psi | |
Flex Modulus | ASTM D790 | 400,000 psi |
Thermal Properties | Units | ASTM | Results |
---|---|---|---|
Burn Rate | ASTM D635 | 1.2 in/min | |
Smoke Density | ASTM D2843 | Max 8%; Rating 5% |
Optical Properties | Units | ASTM | Results |
---|---|---|---|
Light Transmission | ASTM D1003 | >90% | |
Haze | ASTM D1003 | <1.0% |