Modified with special lubricants, TIVAR® DrySlide has the lowest coefficient of friction of any of the TIVAR® products. The enhanced coefficient of friction and anti-static properties make TIVAR® DrySlide an excellent performer in dusty environments. Even damp boxes or parcels covered in shrink-wrap won’t stick to TIVAR® DrySlide. In addition, the enhanced surface lubricity won’t mar packaging or products, but allow them to move freely without jamming from dirt, grit or static build-up. TIVAR® DrySlide is and available in 48″ x 120″ sheets, with gauge sizes ranging from 1/4″ to 2″.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
Ultra High Molecular Weight Polyethylene
Available In
Sheet, Rod, Tube, Profile
Start Your Quote
Send us a message:
*Required Fields
| Type | Size | Length | Color |
|---|---|---|---|
| Sheet | 1/4″ – 2″ | 48 x 120 CTS | Black |
| Rod | Call For Sizes | Black | |
| Tube | Call For Sizes | Black | |
| Profile | Call for Shapes |
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
| Physical Properties | Units | ASTM | Results |
|---|---|---|---|
| Density | g/cm³ | D792 | 0.940 |
| Water Absorption, 24 hrs | % | D570 | <0.010 |
| Mechanical Properties | Units | ASTM | Results |
|---|---|---|---|
| Tensile Strength | psi | D638 | 5100 |
| Comprehensive Strength | psi | D695 | 2900 |
| Ball Indentation Hardness | |||
| Shore Hardness | D2240 | 64 | |
| Izod Impact, Notched | D256 | NB | |
| Compressive Modulus | ksi | D695 | 80 |
| Thermal Properties | Units | ASTM | Results |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | °F | D648 | 116 |
| Maximum Service Temperature, Air | °F | Long Term | 180 |
| Melting Temperature | °F | D648 | 275 |
| Flammability, UL94 | 1/8″ | HB | |
| CTE, linear | °F | E831 | 110 |
NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.
