Manufactured from Kynar® polyvinylidene fluoride resin. This material offers excellent corrosion and chemical resistance atKynar 1000HD both ambient and elevated temperatures. PVDF is also inherently UV stable, mechanically tough, abrasion and flame resistant. Kynar® 1000HD is a whiter grade of PVDF than Kynar® 740. Kynar® PVDF extrusion grades are commonly used to handle harsh chemicals for long periods of time. Kynar® PVDF is chemically resistant to halogens (chlorine, bromine, fluorine, iodine) and strong acids even at high temperatures. As a wire jacketing, Kynar® can be irradiated and used to continuous temperatures up to 175°C and is popular for being inherently flame resistant.
Emco Industrial Plastics doesn’t claim to represent all of the manufacturers or trade name products listed. This list is intended as a guide of typical materials available for purchase from Emco Industrial Plastics, Inc. For additional information, contact an Emco Industrial Plastics representative by filling out the form below.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
PolyVinyliDene Fluoride
Available In
Sheet, Rod
Start Your Quote
Send us a message:
*Required Fields
| Type | Size | Length | Color |
|---|---|---|---|
| Sheet | 3″ – 4″ | 48″ x 96″ CTS | Natural |
| Rod | .750″ or 3.5″ | Std. foot lengths; CTS | Natural |
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
| Physical Properties | Units | ASTM | Results |
|---|---|---|---|
| Density | g/cm^2 | D792 | 1.77 |
| Water Absorption, 24 hrs | % | D570 | 0.03 |
| Mechanical Properties | Units | ASTM | Results |
|---|---|---|---|
| Tensile Strength | N/mm^2 | D638 | 6300 |
| Tensile Elongation @Break | % | D638 | 50 |
| Flexural Strength | N/mm^2 | D790 | 9700 |
| Flexural Modulus | N/mm^2 | 290000 | |
| Compressive Strength | N/mm^2 | D695 | 9000 |
| Compressive Modulus | psi | D695 | |
| Hardness, Shore | D2240 | D75 | |
| IZOD Impact Strength Notched | ft-lb/in | D256 | 3.0 |
| Thermal Properties | Units | ASTM | Results |
|---|---|---|---|
| Coefficient of Linear Thermal Expansion | mm/m °C | D256 | 6.6×10^-5 |
| Melting Temperature | °F | D3418 | 332 |
| Heat Deflection Temp at 264 psi | °F | 230 |
| Electrical Properties | Units | ASTM | Results |
|---|---|---|---|
| Volume Resistivity | ohm-cm | D257 | 1.5×10^17 |