This material is a higher molecular weight material than the standard HDPE. The material displays improved performance characteristics in a variety of piping applications. In addition, the material is UV stabilized and ideal for use in demanding outdoor applications. It retains its properties between -220°F and 180°F and resists most chemicals. It is also NSF certified under Standard 61 to be used in potable water piping systems. HDPE Pipe Grade can be used in a variety of applications including manhole lids and bottoms, pipe reducers, trenches, sumps, pipe flanges, pipe end caps, tanks, milled flange adapters and lifting lugs.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
High Density Polyethylene
Available In
Sheet
Start Your Quote
Send us a message:
*Required Fields
| Type | Size | Length | Color |
|---|---|---|---|
| Sheet | 0.03″ – 1.25″ | 48”x96” | Black |
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
| Physical Properties | Units | ASTM | Results |
|---|---|---|---|
| Density | lb/in^3 | ISO 1183 | 0.959 |
| Mechanical Properties | Units | ASTM | Results |
|---|---|---|---|
| Tensile Stress at Yield | psi | ISO 6259 | >3,500 |
| Tensile Strain (Break) | % | ISO 6259 | >500 |
| Resistance to Rapid Crack Propagation | psi | ISO 13477 | >174 |
| Slow Crack Growth PENT | hrs | ISO 16241 | >3000 |
| Tensile Strength – for Butt – Fusion | ISO 13953 | Test to Failure Ductile |
| Thermal Properties | Units | ASTM | Results |
|---|---|---|---|
| Oxidation Induction Time | min | ISO 11357-6 | >20 |
NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.