Thomas COVID Supplier BadgeDisplaysResourcesCOVID-19 SUPPLIESGalleryGet a Quote
Extruded Acrylic Rod, Shapes and Tubes

Extruded acrylic rod is more cost-efficient than cast acrylic rod and used in POP displays, exhibits, aquariums, and various arts and crafts applications. Extruded acrylic rod stands up well to outdoor exposure without showing wear. Many of the acrylic shapes are designed into POP retail displays and shoe risers/shelves for slat-wall applications. It meets FDA standards and is UV stabilized. It has a forming temp of 350° F and a max continuous temp of 180°F. 

Keep in mind that extruded acrylic rods do not have the optical clarity or machining characteristics of cast acrylic rod. In larger diameter rods (.875″ diameter and above) these high-quality extruded rods are commonly used for grab bars in showers, tubs, and spas. Acrylic extrusions are easily sawed, drilled, milled, engraved and finished.

In addition to sheet products, acrylic can be extruded or cast into a variety of plastic shapes, known as profiles. These include round acrylic rod, tube, z-bar, w-bar, hinge profiles, cabochons, sphears, squares, triangular rods, and many others.

Do you need Fabrication or Machining for Extruded Acrylic Rod, Shapes and Tubes?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name

Available In

ITAR Registered

Start Your Quote

Send us a message:

*Required Fields


Technical Information

Stock Products Properties Applications Advantages

Stock Products

Rod 1/16″ to 2.0″ Up to 8′ Clear and colors

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.


Mechanical PropertiesUnitsASTMResults
Specific Graviity ASTM D-792 1.19
Tensile Strength ASTM D-638 11,250
Tensile Strength Elongation ASTM D-638 6.4
Compressive Strength ASTM D-695 18,000
IZOD Impact Strength ASTM D-256 .0375
Flex Modulus ASTM D-790 475,000
Thermal PropertiesUnitsASTMResults
Coeffcient of Linear Thermal Expansion ASTM D-696 0.000042
Heat Distortion at 264 psi 180
Optical PropertiesUnitsASTMResults
UV Transmission @ 320nm ASTM D1003 >80
Haze ASTM D1003 <0.5


  • POP Displays
  • Industrial uses


  • Easily fabricated
  • Odorless
  • Shatter resistance
  • Very durable
Copyright © 2016 - 2023 Emco Industrial Plastics