Transparent, thermoplastic sheet used widely in the point of purchase industry. Products offer superior impact strength over acrylic and cost effectiveness compared to polycarbonate, and offers deep draws, complex die-cuts, and precise molded-in details without sacrificing structural integrity. It die-cuts and punches easily, and can be bonded or fastened with adhesives, ultrasonic welding, or rivets. In addition, Vivak® is easily decorated by painting, silk screening, or hot stamping.
Easy to fabricate, form, bond, and decorate, Vivak® PETG sheet products are well suited for a variety of point of purchase and other applications. Forming temp. 250°F. – 320°F. Meets FDA standards. Work temp. -40° to 150°F. Not UV stabilized. Brake forming and cold bending operations can be used to make simple bends and curved areas.
Emco Industrial Plastics doesn’t claim to represent all of the manufacturers or trade name products listed. This list is intended as a guide of typical materials available for purchase from Emco Industrial Plastics, Inc. For additional information, contact an Emco Industrial Plastics representative by filling out the form below.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
PolyEthleneTerephtalate Glycol
Available In
Sheet
Start Your Quote
Send us a message:
*Required Fields
| Type | Size | Length | Color |
|---|---|---|---|
| Sheet | .020″ – .375″ TH | 48″ x 96″; CTS | Clear |
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
| Physical Properties | Units | ASTM | Results |
|---|---|---|---|
| Density | lb/in3 | D792 | 0.0441 – 0.0480 |
| Water Absorption, 24 hrs | % | D570 |
| Mechanical Properties | Units | ASTM | Results |
|---|---|---|---|
| Tensile Strength @Yield | psi | D638 | 4,100 – 8,500 |
| Tensile Elongation @Break | % | D638 | 10.0 – 350 |
| Flexural Strength | psi | D790 | 7,200 – 12,200 |
| Flexural Modulus | psi | 400000 | 180,000 – 339,000 |
| Hardness, Rockwell R | D785 | R105 – R110 | |
| IZOD Impact Strength Notched | ft-lb/in | D256 | 1.11 – 20.0 |
| Thermal Properties | Units | ASTM | Results |
|---|---|---|---|
| Coefficient of Linear Thermal Expansion | µin/in-°F | D256 | 3.3 – 3.8 |
| Heat Deflection Temp at 66 psi | °F | D648 | 140 – 160 |
| Heat Deflection Temp at 264 psi | °F | 131 – 162 | |
| Max Operating Temp | °F | 150 | |
| Flammability Rating | UL94 | HB |
| Electrical Properties | Units | ASTM | Results |
|---|---|---|---|
| Dielectric Strength | V/mil | D149 | 410 |
| Dielectric Constant @1 KHz | D150 | 4 | |
| Dissipation Factor @ 1 Hz | D150 | 0.005 |
| Optical Properties | Units | ASTM | Results |
|---|---|---|---|
| 3mm Transparent Clear Transmittance, Total (%) | % | D1003 | 0.300 – 1.00 |
| Refractive Index | 1.57 |
NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.