Emco Industrial Plastics has added vacuum forming to the services we perform in our own facility. Customers who need shaped plastic parts, like equipment covers, enclosures, trim panels or packaging trays, can now get them formed, trimmed and finished by the same team that supplies the material.
For more than 30 years, Emco has been a distributor and fabricator of plastic sheet, rod, tube and profile. We cut, machine, route, weld, bond and polish plastic every day. Bringing vacuum forming under our roof means one more step of a part's journey stays here, instead of being handed off to another shop.
What Vacuum Forming Does
Vacuum forming heats a sheet of thermoplastic until it's soft and flexible, then draws it down over a mold with vacuum. Air pressure presses the sheet tight against the mold, and the part cools in that shape. After it's released, the excess sheet is trimmed away and any holes or cutouts are added.
Vacuum Forming in Four Steps
- 1ClampA flat sheet is locked into a frame at its edges.
- 2HeatHeaters soften the sheet until it sags.
- 3FormVacuum pulls the sheet tight to the mold.
- 4Cool and trimThe part sets, then excess sheet is cut away.
Because the process needs only a single-sided mold and no high-pressure steel tooling, it's one of the most economical ways to produce three-dimensional plastic parts, especially large ones.
Why In-House Matters For Your Project
A formed part usually touches several processes before it's done: material, forming, trimming, and often machining or assembly. When those happen at different suppliers, every handoff adds coordination, freight and another place for a schedule to slip.
- Buy sheet
- ship
- Outside former
- ship
- Trim and machine
- ship
- Your dock
- Sheet from our stock
- Form
- Trim and machine
- Your dock
With forming in-house, Emco can now offer:
- One supplier and one purchase order for material, forming and finishing.
- Material selection and forming under the same roof, so we can recommend the right sheet for your part and know how it will behave on the mold.
- Finishing in the same shop. Our CNC routing, machining, welding and assembly capabilities can take a formed part the rest of the way.
- Simpler revisions. When a design changes, the conversation happens with one team instead of three.
From prototypes to production runs, your formed parts now go from our shelves to your dock without leaving Emco.
What We Can Form
Vacuum forming is a strong fit for large parts, moderate annual volumes, tight tooling budgets and fast product development.
Where vacuum forming fits
Directional comparison, not based on cost data. The best process for a given part depends on its size, shape and quantity.
Typical applications include:
- Product packaging and trays
- Agricultural and medical equipment housings
- Lift truck enclosures
- Railcar interior trim and seating components
- Engine covers for construction equipment
- Fascias for outdoor kiosks and ATMs
Materials We Work With
We stock a wide range of formable sheet. The most common choices for vacuum formed parts are:
Not sure which is right? Tell us where the part will be used and what it needs to stand up to, and we'll recommend a material.
Start a Vacuum Forming Project
To get a quote, send us a drawing, CAD model or sample part, along with the material if you have one in mind, your quantities, and any trimming, holes or assembly you need. We'll review the design, flag anything that could affect formability, and get back to you with pricing and lead time.
You can learn more about the process, design tips and materials on our vacuum forming page, or call us at 973-239-0202.

