- Industries Served
- Contact Us
Trespa TopLab Plus is a self supporting flat panel with an integrated, decorative urethane-acrylic surface and a cellulose fiberreinforced phenolic resin core. A unique patented Electron Beam Curing (EBC) process ensures that each panel is non-porous and resistant to a large number of aggressive chemicals. The surface is impermeable to reagents used in all types of laboratories and is resistant to the effects of wear and tear – making Trespa TopLab Plus ideal for use in labs used by different working groups, such as educational institutions and industrial environments. These properties make Trespa TopLab Plus highly suitable for use in medical and clean room conditions. It can be used in the most challenging environments for many years without losing its good looks or functions.Thanks to its unique surface composition, Trespa TopLab Plus is non-porous. Its anti-microbial properties are incorporated in the product without the use of coatings or additives. This means that these properties will remain active throughout the product’s lifetime. Bacteria, molds, and/or other micro-organisms are unable to grow or penetrate the surface. Bacteria stains will dry relatively fast on the surface – and bacteria will not find any source of nutrition on the material. Independent tests show a reduction in bacteria of 99.99% after 24 hours.
Contact us today for your fabrication and machining needs!Request Fabrication/Machining Services
Start Your Quote
Send us a message:
|Sheet||13mm to 25mm||60″ x 120″ and 73″ x 100″||White, Grey, Green, Yellow, Blue, Red, Black, Speckled|
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
Chemical resistance is affected by the type of chemical, its concentration, ambient temperature, humidity and housekeeping practices. Panels are to be provided with minimum performance in accordance with chemical resistance test per SEFA 8. End users should test Trespa TopLab Plus in actual work environments. Generally, with proper housekeeping (spills cleaned immediately), the following listed chemicals cause no detectable stain, loss of gloss or change in work surface.
Trespa TopLab’s resistance is generally better than Athlon for spills not immediately cleaned up. After 24 hours, the following showed a slight or noticeable stain with Black TopLab Plus: 98% Sulfuric, 65% Nitric, Iodine Crystal and Iodine solution 1%. The balance of chemicals tested did not stain or stains could be cleaned leaving a normal surface. Resistance to staining may be color dependent.
NOTE: Several grades of this material are available. For additional information regarding this plastic, contact your Emco Industrial Plastics representative or call 973-862-4148.