Thomas COVID Supplier BadgeDisplaysResourcesCOVID-19 SUPPLIESGalleryGet a Quote

Tecapet® TF is a material featuring an added solid lubricant with extremely good sliding friction properties which can also be used in the food processing sector. Through the addition of PTFE as a solid lubricant, the material demonstrates excellent sliding properties and low wear behavior alongside the familiar excellent properties of natural Tecapet®.

Brand Names

Emco Industrial Plastics doesn’t claim to represent all of the manufacturers or trade name products listed. This list is intended as a guide of typical materials available for purchase from Emco Industrial Plastics, Inc. For additional information, contact an Emco Industrial Plastics representative by filling out the form below.


Do you need Fabrication or Machining for Tecapet TF?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name
Polyethylene Terephthalate Polyester

Available In
Sheet, Rod

Start Your Quote

Send us a message:

*Required Fields


Technical Information

Stock Products Properties Applications Advantages Grades

Stock Products

Sheet 1/4″ – 4″ 48″ x 96″; CTS Natural & Black
Rod 3/16″ – 5″ DIA CTS Natural & Black

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.


Physical PropertiesUnitsASTMResults
Density lb/in³ D792 0.0499
Water Absorption, 24 hrs % D570 0.10
Mechanical PropertiesUnitsASTMResults
Tensile Strength @Yield psi D638 12500
Tensile Elongation @Break % D638 20
Flexural Strength psi D790 17600
Flexural Modulus psi D790 430000
Hardness, Rockwell M D785 94
IZOD Impact Strength Notched ft-lb/in D256 0.70
Thermal PropertiesUnitsASTMResults
Coefficient of Linear Thermal Expansion µin/in-°F D256 3.9
Heat Deflection Temp at 66 psi °F D648
Heat Deflection Temp at 264 psi °F
Max Operating Temp °F 320
Flammability Rating UL94 HB
Electrical PropertiesUnitsASTMResults
Dielectric Strength V/mil D149 400
Dielectric Constant @1 KHz D150 3.4
Dissipation Factor @ 60 Hz D150 0.002
Optical PropertiesUnitsASTMResults
3mm Transparent Clear Transmittance, Total (%) % D1003
Refractive Index %

NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.


  • Water purification systems
  • Printing equipment
  • Textile components
  • Food-handling equipment
  • Valves


  • Excellent wear resistance
  • Low coefficient of friction
  • Very good chemical resistance
  • No centerline perosity
  • Good electrical insulator
  • High mechanical strength
  • Excellent hardness and stiffness
  • Good weather resistance
  • Low water absorption
  • Good resistance to high energy radiation.


NOTE: Several grades of this material are available. For additional information regarding this plastic, contact your Emco Industrial Plastics representative or call 973-862-4148.

Copyright © 2016 - 2024 Emco Industrial Plastics