Sunlite® ML allows combinations of different colors in one sheet, and adds a multi-layer technological edge to the already wide range of Sunlite® products. Sunlite® multi-layered products provide the benefits of exterior tints that deliver cool natural light and interior tints that enhance any dwelling. Sunllite® ML adds an attractive dimension to any conservatory, and also appeals to architects, who appreciate this creative element when designing structures.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
Polycarbonate
Available In
Sheet
Start Your Quote
Send us a message:
*Required Fields
| Type | Size | Length | Color |
|---|---|---|---|
| Sheet | .125” – .5” | 48”x96” CTS | Clear, Grey, Bronze, Other colors available on special order |
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
| Physical Properties | Units | ASTM | Results |
|---|---|---|---|
| Density | g/cm² | D792 | 1.2 |
| Mechanical Properties | Units | ASTM | Results |
|---|---|---|---|
| Tensile Strength | psi | D638 | 9,500 |
| Tensile Modulus | MPa | D638 | 340000 |
| Flexural Strength | N/mm² | D790 | 13,500 |
| Flexural Modulus | psi | 3.2 | |
| Compressive Strength | psi | D695 | 2500 |
| Hardness, Rockwell R | D785 | 70 | |
| IZOD Impact Strength Notched | kJ.m² | D256 | 14 |
| Thermal Properties | Units | ASTM | Results |
|---|---|---|---|
| Coefficient of Linear Thermal Expansion | x10⁻⁵/K | D256 | 6.6 |
| Heat Deflection Temp at 66 psi | °F | D648 | 6.6 |
| Heat Deflection Temp at 264 psi | °F | 270 |
| Electrical Properties | Units | ASTM | Results |
|---|---|---|---|
| Volume Resistivity | ohm-cm | D257 | 1×10-17 |
NOTE: Several grades of this material are available. For additional information regarding this plastic, contact your Emco Industrial Plastics representative or call 973-862-4148.
