PVDF, also known as Kynar®, is a highly non-reactive and pure thermoplastic fluoropolymer. It is generally used in applications requiring the highest purity, strength, and resistance to solvents, acids, bases and heat and low smoke generation during a fire event.
By adding special conductive materials to the resin, the conductivity of PVDF is increased to control static electricity formation or conduction. These additives may be in the form of either carbon fibers (PVDF CN-F) or carbon powder (PVDF CN-P). Some properties of the original PVDF material are modified by the addition of fillers, but chemical resistance, strength, and manufacturability remain generally the same. Both PVDF CN-F and PVDF CN-P are available in black color only.
Emco Industrial Plastics doesn’t claim to represent all of the manufacturers or trade name products listed. This list is intended as a guide of typical materials available for purchase from Emco Industrial Plastics, Inc. For additional information, contact an Emco Industrial Plastics representative by filling out the form below.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
PolyVinyliDene Fluoride, Static Control
Available In
Sheet, Rod, Film
Start Your Quote
Send us a message:
*Required Fields
| Type | Size | Length | Color |
|---|---|---|---|
| Sheet | 1/32″ – 4″ TH | 12’ – 48’ x 12’ – 96″; CTS | Black |
| Rod | 1/8″ – 4″ DIA | Std. foot lengths; CTS | Black |
| Film | 0.002″ – 0.029″ TH | Std. roll and width sizes; CTS | Black |
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.