Plexiglas® cell cast acrylic sheet products are suitable for farmers, museums, and galleries. Both Plexiglas® G UF-3 and Plexiglas® G UF-4 offer superior optical performance and filter out over 95% of harmful UV rays from natural and artificial light sources, which make it ideal for displaying your treasured items. Plexiglas® G UF-3 offers the maximum UV protection with transmission starting at 395 nm. Plexiglas® G UF-4 offers a slightly lower amount of UV protection with transmission starting at 385 nm. However, this allows for higher overall visible light transmission which results in a sheet with slightly better edge color. Both products are suitable for museum display cases, framing, and any other type of project where UV protection is required.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
Acrylic
Available In
Sheet
Start Your Quote
Send us a message:
*Required Fields
| Type | Size | Length | Color |
|---|---|---|---|
| Sheet | 0.118″ – 0.472″ | 48” x 96” to 72″ x 96″CTS | Clear |
| Other | Shapes |
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
| Physical Properties | Units | ASTM | Results |
|---|---|---|---|
| Density | g/cm³ | D792 | 1.19 |
| Mechanical Properties | Units | ASTM | Results |
|---|---|---|---|
| Tensile Strength @ yield | psi | D638 | 10500 |
| Tensile Modulus | MPa | D638 | 450000 |
| Tensile Elongation @Break | % | D638 | 4.9 |
| Flexural Strength | MPa | 16000 | |
| Flexural Modulus | psi | 450000 | |
| Compressive Strength | psi | D695 | |
| IZOD Impact Strength Notched | kJ.m² | D256 | 0.3 |
| Thermal Properties | Units | ASTM | Results |
|---|---|---|---|
| Coeffcient of Linear Thermal Expansion | x10⁻⁵/K | C177 | 3.9 |
| Heat Deflection Temp at 264 psi | °F | 205 |
| Electrical Properties | Units | ASTM | Results |
|---|---|---|---|
| Surface Resistivity @60 Hz | ohms/sq | D257 | |
| Volume Resistivity, 50% RH | ohm-cm | D250 |
| Optical Properties | Units | ASTM | Results |
|---|---|---|---|
| Luminous Transmittance | % | D1003 | 92 |
| Refractive Index | % | D542 | 1.49 |
NOTE: Several grades of this material are available. For additional information regarding this plastic, contact your Emco Industrial Plastics representative or call 973-862-4148.