PolyEtherEtherKetone (PEEK) is a high-performance engineering thermoplastic that offers chemical and water resistance while operate at higher temperatures. Peek Unfilled is a general-purpose grade that is unreinforced and offers the highest elongation and toughness of all PEEK grades. Unfilled PEEK is available in sheet and rod forms in multiple colors including: natural (a very light brown or tan) and black colors. Black PEEK is ideal for instrument components where aesthetics is important, as well as for seal components where ductility and inertness are important. All unfilled PEEK grades comply with FDA regulation 21 CFR 177.2415 for repeated food contact.
Benefits of PEEK Unfilled
Maintains shape and physical properties under extremely high temperatures (480 degrees max operating temperature)
FDA approved for repetitive food contact
Resistant to harsh chemical environments
Minimal smoke and toxic-gas emissions
Additional formulations (i.e., glass-filled, mineral-filled, carbon-filled, bearing, and medical grades) and variants within these grades (FDA compliant, static dissipative, high temperature) are available to meet specific application demands. Contact an Emco Industrial Plastics representative who can help you choose the correct material to meet the needs of your application.
Brand Names
Ketron® HPV
PEEK-LSG
Semitron® ESd 480
Susta® PEEK
Tecapeek™
Unitrex®
Vestakeep PEEK
Victrex® PEEK
Emco Industrial Plastics doesn’t claim to represent all of the manufacturers or trade name products listed. This list is intended as a guide of typical materials available for purchase from Emco Industrial Plastics, Inc. For additional information, contact an Emco Industrial Plastics representative by filling out the form below.
Photo Gallery
Filter by Capability:
Filter by Shape:
Reset Filters
No images found matching the description. Please modify your filters to see additional results or click "Reset Filters" above to start over.
Do you need Fabrication or Machining for PEEK Unfilled?
Contact us today for your fabrication and machining needs!
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
Properties
Physical Properties
Units
ASTM
Results
Density
lb/in³
D792
0.047
Water Absorption, 24 hrs
%
D570
0.1
Mechanical Properties
Units
ASTM
Results
Tensile Strength @yield
psi
D638
16000
Tensile Modulus
psi
D638
500000
Tensile Elongation @Break
%
D638
20
Flexural Strength
psi
D790
25000
Flexural Modulus
psi
400000
600000
Compressive Strength
psi
D695
20000
Compressive Modulus
psi
D695
50000
Hardness, Rockwell R
D785
R126 (M100)
IZOD Impact Strength Notched
ft-lb/in
D256
1
Thermal Properties
Units
ASTM
Results
Coefficient of Linear Thermal Expansion
(x 10-⁵ in./in./°F)
D256
2.6
Heat Deflection Temp at 264 psi
°F
320
Melting Temperature
°F
D3418
644
Max Operating Temp
°F
480
Thermal Conductivity
BTU-in/ft²-hr-°F
C177
1.75
Electrical Properties
Units
ASTM
Results
Dielectric Strength. 1/8″ th.
V/mil
D149
480
Dielectric Constant @1 MHz
D150
3.3
Dissipation Factor @1 MHz
D150
0.003
Volume Resistivity, 50% RH
ohm-cm
D257
4.9 x 10¹⁶
NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.
Applications
Pump gears, wear plates
Insulators, connectors
Seals, washers
Bearings, bushings
Machine omponents for semicondutor, electrical, medical, food processing
Aerospace parts
Advantages
Excellent chemical resistance
Very low moisture absorption
Good wear and abrasion resistance
Unaffected by continuous exposure to hot water or steam
Good radiation resistance
Excellent flexural, impact, and tensile characteristics
High strength alternative to fluoropolymers
Grades
Unfilled
Glass filled
Carbon Filled
NOTE: Several grades of this material are available. For additional information regarding this plastic, contact your Emco Industrial Plastics representative or call 973-862-4148.
Request a Quote TodayA member of our team will get with you right away!Request a Quote »