DisplaysResourcesGalleryGet a Quote

PC-350™ Polycarbonate is a plastic sheet product that controls static electricity for many applications, including bent and contoured equipment covers, guards, enclosures, and panels. It is a premium quality polycarbonate sheet with a coating that prevents charge generation on the sheet surfaces. This controls particulate attraction and prevents electrostatic discharge (ESD) events completely independent of humidity. PC-350™ Polycarbonate fabricates simply, is light in weight and is available in large sheet sizes. It has excellent clarity and chemical resistance, plus superior impact resistance, flame-spread properties, and bending characteristics.

PC-350™ Polycarbonate is easily fabricated into a variety of flat and bent configurations using the same equipment and fabrication techniques generally employed with un-surfaced polycarbonate sheet products. This product is designed to accommodate heat bending, however, care must be taken to avoid applying too much heat to prevent damage to the PC-350 surface. When solvent welding, it is recommended that the PC-350 surface be removed to achieve the best bond strengths.

For general purpose grade see PC-300.
Need to touch up a coating on cut or machined edges? Find out more about our Trim Fluid here.

Features:

  • Cannot be tribocharged when properly grounded
    Prevents build-up of static charge and accumulation of harmful contamination.
  • Electrostatic decay in less than 0.05 second per Federal Test Standard 101C, Method 4046.1
    Results in rapid static dissipation without arcing.
  • Surface resistivity of 106 - 108 ohms per square
    Provides for ESD control without the need for ionization.
  • Permanence in static dissipation performance
    Avoids cost of application of temporary topical anti-stats.
  • Humidity independent static charge control
    Avoids inconvenience of maintaining high levels of humidity and damage caused by such humidity.
  • Advanced technology, uniform surface treatment
    Avoids conductive discontinuities (charged "hot spots") often found with non-uniform temporary topical anti-stats.
  • Superior impact resistance
    Provides exceptional shatter resistance for safety.
  • Superior flame spread properties
    Provides additional protection for equipment in a fire.
  • Superior fabrication and bending characteristics
    Provides maximum versatility and workability during part fabrication.
  • Superior chemical resistance
    Reduces risk of solvent or chemical surface damage.
  • Excellent clarity
    Premium optical quality polycarbonate with clear C-350 surface minimizes visible distortion.
  • PC-350™ Polycarbonate is not designed for exposure
    to direct sunlight and is not warranted for external applications.

Emco Industrial Plastics doesn’t claim to represent all of the manufacturers or trade name products listed. This list is intended as a guide of typical materials available for purchase from Emco Industrial Plastics, Inc. For additional information, contact an Emco Industrial Plastics representative by filling out the form below.

Do you need Fabrication or Machining for PC-350™ Static Dissipative Polycarbonate?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name
Polycarbonate

Available In
Sheet

Start Your Quote

Send us a message:

*Required Fields

Gallery

Technical Information

Stock Products Properties Applications Advantages

Stock Products

TypeSizeLengthColor
Sheet 1/8” – ½” 48”x96” CTS Clear, Grey, Bronze, Other colors available on special order

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.

Properties

Physical PropertiesUnitsASTMResults
Density g/cm² D792 1.2
Mechanical PropertiesUnitsASTMResults
Tensile Strength psi D638 9500
Tensile Elongation @Break % D638 34000
Flexural Strength MPa D790 13,500
Flexural Modulus psi 340000
Compressive Strength psi D695 12500
IZOD Impact Strength Notched ft.lb/in^² D256 16
Thermal PropertiesUnitsASTMResults
Coefficient of Linear Thermal Expansion x10⁻⁵/K D256 3.8×10⁻⁵
Heat Deflection Temp at 264 psi °F 270
Electrical PropertiesUnitsASTMResults
Surface Resistivity @60 Hz ohms/sq D257 10⁶
Volume Resistivity, 50% RH ohm-cm D257 10⁶
Optical PropertiesUnitsASTMResults
3mm Transparent Clear Transmittance, Total (%) % D1003 75

Applications

  • Semi-conductor
  • Electronic
  • Micro-manufacturing
  • Guards
  • Windows
  • Covers
  • Transparent room partitions
  • Process equipment enclosures
  • Mini-environment glazing panels
  • Conveyor line covers

Advantages

  • Prevents buildup of static charge & accumulation of harmful contamination
  • Results in rapid static dissipation without arching
  • Provides for ESD control without the need for ionization
  • Avoids conductive discontinuities
  • Provides excellent shatter resistance for safety
  • Excellent clarity
  • Superior chemical resistance
  • Superior flame spread properties
Copyright © 2016 - 2019 Emco Industrial Plastics