Displays Resources Gallery Get a Quote
Heat Stabilized NylonNylon HS Blue is heat stabilized cast nylon 6, which is easily distinguished by its distinctive blue color. It is manufactured with additives in the form of high-temperature resistant colorants, U.V. stabilizers, and heat stabilizers which allow HS Blue to retain its properties in applications operating at elevated temperatures. This reduces stress distortion that can be caused by machining. 


  • Heat stabilized
  • Excellent abrasion and wear resistance
  • Retains physical properties as the temperature is increased


  • Transport
  • Shipbuilding
  • Food and food packaging
  • Pharmaceuticals
  • Steel mills
  • Quarrying and mining
  • Cranes
  • Conveyors

Do you need Fabrication or Machining for Nylon HS Blue?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name
polyhexamethylene adiptimide

Available In
Sheet, Rod

Start Your Quote

Send us a message:

*Required Fields


Technical Information

Stock Products Properties Applications Advantages

Stock Products

Sheet 8mm-100mm 24” x 48”, 48” x 96”; CTS Blue
Rod 10mm-500mm DIA Std. foot lengths, CTS Blue

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.


Physical PropertiesUnitsASTMResults
Density lb/in3 D792 0.42
Mechanical PropertiesUnitsASTMResults
Tensile Strength psi D638 10,000
Tensile Modulus psi D638 500000
Tensile Elongation @Break % D638 35
Compressive Strength psi D695 13,000
Compressive Modulus psi D695 425000
Flexural Strength psi D790 15000
Flexural Modulus psi D790 425000
Izod Impact Strength ft.lb/in^2 D256 0.9
Coefficient of Friction (Dynamic) 0.15
Thermal PropertiesUnitsASTMResults
Melting Point °F D3418 428
Max Operating Temp. °F 200
Max Continuous Service Temp °F -40
Coeffcient of Linear Thermal Expansion °F^-1 4.44×10^-5
Flammability HB
Electrical PropertiesUnitsASTMResults
Dielectric Constant @1 MHz D150 3.7
Dielectric Constant (Low Frequency) 100Hz 4
Dielectric Strength kV/in 635
Volume Resistivity ohm-cm D257 >10^13
Surface Resistivity ROA ohm 1×10^12
Comparitive Tracking Index CTI 600
NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.


  • Wear Rings and Pads
  • Guides
  • Rollers
  • Pump Blocks
  • Pusher Blocks
  • Thruster Nozzles
  • Spacers
  • Dolly Blocks
  • Shims
  • Sheaves
  • Bush Stoppers
  • Bespoke Components


  • UV Stabilized
  • Good PV and load bearing capabilities
  • Improved mechanical properties
  • Good dimensional stability
  • Chemical resistance
  • Better performance at higher operating temperatures
  • Heat Stabilized
  • Excellent abrasion and wear resistance
Copyright © 2016 - 2024 Emco Industrial Plastics