DisplaysResourcesCOVID-19 SUPPLIESGalleryGet a Quote

Of all the unmodified nylons, Nylon 101 is the strongest, most rigid and has one of the highest melting points. It is commonly specified for screw machined electrical insulators and food contact parts

Do you need Fabrication or Machining for Nylon 101 PA66?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name

Available In
Sheet, Rod

3A-Dairy, FDA Compliant (Natural Only), NSF Compliant, USDA Compliant

Start Your Quote

Send us a message:

*Required Fields


Technical Information

Stock Products Properties Applications Advantages

Stock Products

Sheet 1/16″ – 2″ TH 12″ x 24″, 24″ x 48″, 12″ x 48″ Grey
Rod 3/16″ – 2″ DIA 96″ Grey

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.


Physical PropertiesUnitsASTMResults
Specific Gravity g/cc D792 1.15
Water Absorption. 24 hrs % D570 0.30
Mechanical PropertiesUnitsASTMResults
Elongation @ Break, 73°F % D638 50
Flexural Strength, 73°F psi D790 15,000
Flexural Modulus, 73°F ksi D790 450
Compressive Strength @10% psi D695 12,500
Shear Strength psi D732 10,000
Rockwell Hardness M scale D785 85
Coefficient of Friction D696 .25
Tensile Strength psi D638 12,000
Thermal PropertiesUnitsASTMResults
Maximum Serice Temperature °F UL746B 210
Melting Point °F D3418 500
Flammability UL94 V-2
Electrical PropertiesUnitsASTMResults
Dielectric Strength kV/in D149 400
NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.


  • Bearings
  • Rollers
  • Wheels
  • Wear Components
  • Wear Pads
  • Gears


  • Superior wear resistance
  • k-factor = 12
  • PV = 5x standard cast nylons
  • Extended part life
  • Continues to outperform others or other materials time and time again
Copyright © 2016 - 2024 Emco Industrial Plastics