Nylatron GSM PA6 contains finely divided particles of molybdenum disulphide (MoS2) to enhance its load bearing capabilities while maintaining the impact resistance inherent to nylon. It is the most commonly used grade for gears, sheaves, sprockets and custom parts. It is grey-black in color.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
Polyamide
Available In
Sheet, Rod
Start Your Quote
Send us a message:
*Required Fields
| Type | Size | Length | Color |
|---|---|---|---|
| Sheet | 1/16″ – 2″ TH | 12″ x 24″, 24″ x 48″, 12″ x 48″ | Black |
| Rod | 3/16″ – 2″ DIA | 96″ | Black |
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
| Physical Properties | Units | ASTM | Results |
|---|---|---|---|
| Specific Gravity | g/cc | D792 | 1.16 |
| Water Absorption. 24 hrs | % | D570 | 0.60 |
| Mechanical Properties | Units | ASTM | Results |
|---|---|---|---|
| Elongation @ Break, 73°F | % | D638 | 30 |
| Flexural Strength, 73°F | psi | D790 | 16,000 |
| Flexural Modulus, 73°F | ksi | D790 | 500 |
| Compressive Strength @10% | psi | D695 | 14,000 |
| Shear Strength | psi | D732 | 10,500 |
| Rockwell Hardness | M scale | D785 | 80 |
| Coefficient of Friction | D696 | .20 | |
| Tensile Strength | psi | D638 | 11,000 |
| Thermal Properties | Units | ASTM | Results |
|---|---|---|---|
| Maximum Serice Temperature | °F | UL746B | 200 |
| Melting Point | °F | D3418 | 420 |
| Flammability | UL94 | HB |
| Electrical Properties | Units | ASTM | Results |
|---|---|---|---|
| Dielectric Strength | kV/in | D149 | 400 |