Molybdenum disulphide (MoS2) filled nylon offering improved strength and rigidity. With a lower coefficient of linear thermal expansion than Nylon 101, Nylatron GS parts maintain better fit and clearances, and have less tendency to seize as bearings.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
Polyamide
Available In
Sheet, Rod
Start Your Quote
Send us a message:
*Required Fields
| Type | Size | Length | Color |
|---|---|---|---|
| Sheet | 1/16″ – 2″ TH | 12″ x 24″, 24″ x 48″, 12″ x 48″ | Black |
| Rod | 3/16″ – 2″ DIA | 96″ | Black |
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
| Physical Properties | Units | ASTM | Results |
|---|---|---|---|
| Specific Gravity | g/cc | D792 | 1.16 |
| Water Absorption. 24 hrs | % | D570 | 0.30 |
| Mechanical Properties | Units | ASTM | Results |
|---|---|---|---|
| Elongation @ Break, 73°F | % | D638 | 25 |
| Flexural Strength, 73°F | psi | D790 | 17,000 |
| Flexural Modulus, 73°F | ksi | D790 | 460 |
| Compressive Strength @10% | psi | D695 | 16,000 |
| Flexural Yield Strength | psi | D790 | 17,000 |
| Rockwell Hardness | M scale | D785 | 85 |
| Compressive Modulous | ksi | D695 | 420 |
| Tensile Strength | psi | D638 | 12,500 |
| Thermal Properties | Units | ASTM | Results |
|---|---|---|---|
| Maximum Service Temperature | °F | 220 | |
| Melting Point | °F | D3418 | 500 |
| Deflection Temperature | °F | D648 | 200 |
| Electrical Properties | Units | ASTM | Results |
|---|---|---|---|
| Dielectric Strenth | kV/in | D149 | 350 |
