DisplaysResourcesCOVID-19 SUPPLIESGalleryGet a Quote

This ultra-high performance bearing grade of PA6 provides wear resistance near the levels of Nylatron NSM PA6 with superior load bearing capability and an industry first – a near zero level of “stick-slip.”  This elimination of chatter provides an extraordinary amount of control for high precision applications.

Units equipped with Nylatron 703 XL can accurately display smaller movements made possible by today’s sophisticated control devices. Static and dynamic coefficients of friction that approximate each other at virtually every point over the product’s useful range, make this possible.

Nylatron 703 XL was developed to meet the increasing needs of engineers in the construction and production equipment industries. Materials like Nylatron® NSM and Nylatron® GSM are still available, and are widely used in critical bearing applications.

Do you need Fabrication or Machining for Nylatron 703XL PA6?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name

Available In
Sheet, Rod

Start Your Quote

Send us a message:

*Required Fields


Technical Information

Stock Products Properties Applications Advantages

Stock Products

Sheet 1/16″ – 2″ TH 12″ x 24″, 24″ x 48″, 12″ x 48″ Brown
Rod 3/16″ – 2″ DIA 96″ Brown

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.


Physical PropertiesUnitsASTMResults
Specific Gravity g/cc D792 1.11
Water Absorption. 24 hrs % D570 0.47
Mechanical PropertiesUnitsASTMResults
Elongation @ Break, 73°F % D638 15
Flexural Strength, 73°F psi D790 13,000
Flexural Modulus, 73°F ksi D790 360
Compressive Strength @10% psi D695 10,000
Flexural Yield Strength psi D790 13,000
Rockwell Hardness M scale D785 65
Compressive Modulous ksi D695 360
Tensile Strength psi D638 9,000
Thermal PropertiesUnitsASTMResults
Maximum Service Temperature °F 200
Melting Point °F D3418 420
Deflection Temperature °F D648 200
Electrical PropertiesUnitsASTMResults
Service Resistivity per Square ohm D257 >=1.00e+12
NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.


  • Wear pads
  • Bearing blocks
  • Wear guides
  • Linear bearings and bushings


  • Good mechanical and electrical properties
  • Ideal balance of strength and toughness
  • Cast as finished parts and near net shapes
  • No “slip-stick” for precise, efficient control
  • Abrasion resistant
  • Good thermal resistance
  • Good dimensional stability
Copyright © 2016 - 2024 Emco Industrial Plastics