Thomas COVID Supplier BadgeDisplaysResourcesCOVID-19 SUPPLIESGalleryGet a Quote

Offers superior heat aging and creep resistance and retention of stiffness up to 300°F.  It is reddish brown in color and used where PA 6, PA 66, POM and PET fall short.

Do you need Fabrication or Machining for Nylatron 4.6 PA46?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name
Polyamide

Available In
Sheet, Rod

Start Your Quote

Send us a message:

*Required Fields

Gallery

Technical Information

Stock Products Properties Applications Advantages

Stock Products

TypeSizeLengthColor
Sheet 1/16″ – 2″ TH 12″ x 24″, 24″ x 48″, 12″ x 48″ Reddish Brown
Rod 3/16″ – 2″ DIA 96″ Reddish Brown

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.

Properties

Physical PropertiesUnitsASTMResults
Specific Gravity g/cc D792 1.19
Water Absorption. 24 hrs % D570 0.60
Mechanical PropertiesUnitsASTMResults
Elongation @ Break, 73°F % D638 25
Flexural Strength, 73°F psi D790 17,000
Flexural Modulus, 73°F ksi D790 450
Compressive Strength @10% psi D695 16,000
Flexural Yield Strength psi D790 17,000
Rockwell Hardness M scale D785 97
Compressive Modulous ksi D695 325
Tensile Strength psi D638 15,000
Thermal PropertiesUnitsASTMResults
Maximum Service Temperature °F 300
Melting Point °F D3418 554
Deflection Temperature °F D648 320
Electrical PropertiesUnitsASTMResults
Service Resistivity per Square ohm D257 >=1.00e+13
NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.

Applications

  • Bearings
  • Rollers
  • Wheels
  • Wear Components
  • Wear Pads
  • Gears

Advantages

  • Good mechanical and electrical properties
  • Ideal balance of strength and toughness
  • Cast as finished parts and near net shapes
Copyright © 2016 - 2024 Emco Industrial Plastics