Makrolon® UV polycarbonate sheet is an enhanced UV-resistant sheet with exceptional weatherability and superior impact strength. Available in clear as well as a variety of colors, UV is the perfect choice for architectural applications where extended service life and resistance to color shift is required. Makrolon® UV polycarbonate sheet is easily thermoformed, fabricated, and decorated. This performance is backed by a 10-year comprehensive warranty against breakage, excessive yellowing, and loss of light transmission. Makrolon® UV sheet is a transparent polycarbonate product with an advanced UV resistant technology that assures long lasting outdoor weathering performance in flat and curved glazing applications. It has higher impact resistant than acrylic and glass, and it can be cold formed during installation. Makrolon® UV is produced with high optical quality and minimal distortion in clear, a range of standard architectural tints, or can be custom matched to any color. Makrolon® UV has a ten (10) year Limited Product Warranty against breakage, yellowing, and loss of light transmission.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
Polycarbonate
Available In
Sheet
Start Your Quote
Send us a message:
*Required Fields
| Type | Size | Length | Color |
|---|---|---|---|
| Sheet | .118″ – .500″ | 48” x 96” CTS | Clear, Bronze, Gray, Green, Dark gray |
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
| Physical Properties | Units | ASTM | Results |
|---|---|---|---|
| Density | g/cm^3 | D792 | 1.2 |
| Mechanical Properties | Units | ASTM | Results |
|---|---|---|---|
| Tensile Strength @ yield | psi | D638 | 9500 |
| Tensile Modulus | MPa | D638 | 340000 |
| Tensile Elongation @Break | % | D638 | 110 |
| Flexural Strength | MPa | 13500 | |
| Flexural Modulus | psi | 345000 | |
| Compressive Strength | psi | D695 | 12500 |
| IZOD Impact Strength Notched | kJ.m^2 | D256 | 18 |
| Thermal Properties | Units | ASTM | Results |
|---|---|---|---|
| Coeffcient of Linear Thermal Expansion | x10^-5/K | C177 | 3.75 |
| Heat Deflection Temp at 264 psi | °F | °F |
| Electrical Properties | Units | ASTM | Results |
|---|---|---|---|
| Surface Resistivity @60 Hz | ohms/sq | D257 | |
| Volume Resistivity, 50% RH | ohm-cm | D250 | 8.2 |
| Optical Properties | Units | ASTM | Results |
|---|---|---|---|
| 3mm Transparent Clear Transmittance. Total (%) | % | D1003 | |
| Refractive Index | % | D542 | 1.586 |
