Kydex® 6185 is a proprietary thermoplastic sheet with improved heat distortion temperature (HDT) for higher in-service temperatures while providing excellent extensibility, good impact resistance, and excellent solvent resistance. Kydex® 6185 meets FAR 25.853 (a) for use in aircraft interior parts. Maximum recommended service temperature is approximately 185-190° F depending on thermoforming technique and application.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
Polymethyl Methacrylate/Polyvinyl Chloride
Available In
Sheet
Start Your Quote
Send us a message:
*Required Fields
| Type | Size | Length | Color |
|---|---|---|---|
| Sheet | .400” and up | 48″x96″ CTS | 8 Distinctive Colors |
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
| Physical Properties | Units | ASTM | Results |
|---|---|---|---|
| Density | lb/in³ | D792 | 1.33-1.27 |
| Mechanical Properties | Units | ASTM | Results |
|---|---|---|---|
| Tensile Strength | psi | D638 | 6400 |
| Flexural Strength | psi | D790 | 9,600 |
| Hardness, Rockwell | D785 | 104 | |
| IZOD Impact Strength Notched | ft-lb/in | D256 | 5 |
| Thermal Properties | Units | ASTM | Results |
|---|---|---|---|
| Heat Deflection Temp at 264 psi | °F | 195 |