Komatex® is a lightweight closed cell, free foam, rigid PVC sheet perfect for screen printing, painting, laminating, vinyl lettering, and forming projects. It is homogeneously colored with a matte finish that is tough and versatile for many of today’s applications.
Komatex® is manufactured to be used for interior and limited exterior applications. It can be sawed, drilled, bent, and fabricated using ordinary (plastic) tools and fasteners. Komatex® is free of lead, cadmium, and barium and complies with national and international regulations protecting health and the environment.
Emco Industrial Plastics doesn’t claim to represent all of the manufacturers or trade name products listed. This list is intended as a guide of typical materials available for purchase from Emco Industrial Plastics, Inc. For additional information, contact an Emco Industrial Plastics representative by filling out the form below.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
Polyvinyl Chloride
Available In
Sheet
Certifications
UL94 V0, UL94 5V
Start Your Quote
Send us a message:
*Required Fields
Type | Size | Length | Color |
---|---|---|---|
Sheet | 1mm – 12.7mm | 48″x96″. 48″x120″; CTS | White |
Sheet | 1mm, 2mm, 3mm, 6mm, 12.7mm | 48″x96″. 48″x120″; CTS | Black |
Sheet | 3mm and 6mm | 48″x96″. 48″x120″; CTS | Many Colors |
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
Additional Colors: White, Black, Gray, Dark Gray, Beige, Purple, Burgundy, Red, Orange, Yellow, Dark Yellow, Green, Dark Green, Light Blue, Dark Blue
Physical Properties | Units | ASTM | Results |
---|---|---|---|
Density | g/cm^2 | D792 | 0.55 |
Water Absorption, 24 hrs | % | D570 | <0.3 |
Mechanical Properties | Units | ASTM | Results |
---|---|---|---|
Tensile Strength | N/mm^2 | D638 | 12 |
Tensile Elongation @Break | % | D638 | 15 |
Flexural Strength | N/mm^2 | D790 | 20 |
Flexural Modulus | N/mm^2 | D790 | 850 |
Compressive Strength | N/mm^2 | D695 | >3.0 |
Hardness, D | D785 | 55 |
Thermal Properties | Units | ASTM | Results |
---|---|---|---|
Coeffcient of Linear Thermal Expansion | mm/m °C | 0.08 | |
Melting Temperature | °C | D3418 | 78 |
Thermal Conductivity | W/mK | C177 | 0.06 |
Electrical Properties | Units | ASTM | Results |
---|---|---|---|
Dielectric Strength. 1/8″ th. | kV/in | D179 | 5 |
Dielectric Constant @1 MHz | D150 | 1.6 | |
Surface Resistivity @60 Hz | ohms/sq | D257 | 6×10^14 |
Volume Resistivity, 50% RH | ohm-cm | D257 | >10^16 |
NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.