Thomas COVID Supplier BadgeDisplaysResourcesCOVID-19 SUPPLIESGalleryGet a Quote

FDA compliant Fluorosint® HPV PTFE is a high performance bearing grade of Fluorosint® – optimized for high PV and very low “K” or wear factor. Fluorosint® HPV PTFE was developed for bearing applications where other, low-tech PTFE formulations exhibit premature wear or simply cannot perform. FDA compliance gives food and pharmaceutical equipment manufacturers new design options and all benefit from its excellent load bearing and wear characteristics.

Do you need Fabrication or Machining for Fluorosint HPV Enhanced PTFE?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name

Available In
Sheet, Rod, Tube

Start Your Quote

Send us a message:

*Required Fields


Technical Information

Stock Products Properties Applications Advantages Grades

Stock Products

Sheet 6.35-76.20mm Std sizes CTS Tan, Light Gray
Rod Dia. 12.70-222.25mm Std sizes CTS Tan, Light Gray
Tube O.D. 31.75-304.80mm Std sizes CTS Tan, Light Gray

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.


Physical PropertiesUnitsASTMResults
Density lb/in³ D792 0.074
Water Absorption, 24 hrs % D570 0.15
Mechanical PropertiesUnitsASTMResults
Tensile Strength psi D638 1450
Tensile Modulus psi D638 210000
Tensile Elongation @Break % D638 90
Flexural Strength psi D790 2500
Flexural Modulus psi D790 350000
Compressive Strength psi D695 3000
Compressive Modulus psi D695 110000
Hardness, Rockwell D785 R44
IZOD Impact Strength Notched ft-lb/in D256 1.8
Thermal PropertiesUnitsASTMResults
Coeffcient of Linear Thermal Expansion x 10^-5 in./in./°F D256 4.9
Heat Deflection Temp at 264 psi °F 180
Melting Temperature °F D3418 621
Max Operating Temp. °F 500
Electrical PropertiesUnitsASTMResults
Dielectric Strength. 1/8″ th. V/mil D149 200
Dielectric Constant @1 MHz D150 2.65
Dissipation Factor@1 MHz D150 0.008
Surface Resistivity @60 Hz ohms/sq D257 >10^13


  • Bearings
  • Commercial food equipment
  • Wear guides
  • High performance seals
  • Thrust washers


  • FDA Compliant
  • Low coefficient of thermal expansion
  • High load capability
  • Superior deformation under load
  • Continuous use temperatures to 500F
  • Chemical resistance parallels PTFE


  • Fluorosint® 500
  • Fluorosint® 207
  • Fluorosint® MT-01
Copyright © 2016 - 2023 Emco Industrial Plastics