DisplaysResourcesSpecialsGalleryGet a Quote

Flametec® Clean Room PVC-C sheet material is designed to be the most economical choice in FM 4910 materials for use in construction of wet benches, process tools, and cleanroom furniture and cabinetry.

Do you need Fabrication or Machining for Flametec FM 4910 Clean Room PVC-C?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name
Chlorinated polyvinyl chloride

Available In

4910 Listed, RoHS Compliant, Meets Class 1 rating for UL 2360

Start Your Quote

Send us a message:

*Required Fields


Technical Information

Stock Products Properties Applications Advantages Grades

Stock Products

Sheet .125” – 1.5″ 48″x96″ CTS White

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.


Physical PropertiesUnitsASTMResults
Density g/cm^3 1.56
Water Absorption, 24 hrs % 28
Mechanical PropertiesUnitsASTMResults
Tensile Strength Mpa 7900
Tensile Elongation @Break >50 28
Flexural Strength MPa 14,500
Flexural Modulus psi 457000
Hardness, D 67
Izod Impact Strength, notched kJ.m^2 1.5
Thermal PropertiesUnitsASTMResults
Coeffcient of Linear Thermal Expansion x10^-5/K 3.7
Heat Deflection Temp at 66 psi °F 212
Heat Deflection Temp at 264 psi °F 57
Melting Temperature °F 327
Max Operating Temp. °C 190
Electrical PropertiesUnitsASTMResults
Dielectric Strength. 1/8″ th. kV/mm 500-650
Dielectric Constant @1 MHz 2.3
Volume Resistivity, 50% RH ohm-cm 10^5

NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.


  • Wet process equipment
  • Chemical delivery systems
  • Cleanroom cabinetry, furniture, and accessories
  • Quartz cleaners
  • Chemical drum cabinets


  • Easy to fabricate
  • Very economical
  • Good formability
  • Chemical resistant
  • 4910 Listed by FM approvals


  • Flametec® CP-7D
  • Flametec® CP-5
  • Flametec® Kytec® PVDF
Copyright © 2016 - 2018 Emco Industrial Plastics