Ex-Cel® PVC FF (Free Foam) is a chemically formed, light weight, rigid extruded sheet with a fine and homogeneous closed cell structure.It has a matte finish on both sides making it ideal for graphics applications including direct digital imaging, screen inks, lettering enamels, and vinyl graphics. Ex-Cel® has great characteristics, such as ease of fabrication, that make it perfect for applications in many different industries, including construction, advertising, photographic, electrical, and others.
Emco Industrial Plastics doesn’t claim to represent all of the manufacturers or trade name products listed. This list is intended as a guide of typical materials available for purchase from Emco Industrial Plastics, Inc. For additional information, contact an Emco Industrial Plastics representative by filling out the form below.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
Polyvinyl Chloride
Available In
Sheet
Start Your Quote
Send us a message:
*Required Fields
| Type | Size | Length | Color |
|---|---|---|---|
| Sheet | 1mm – 25mm | 48″x96″ CTS | Bright White |
| Sheet | 3mm-6mm | 48″x96″; CTS | Yellow, Sky Blue, Royal Blue, Black, Red, Ruby Red, Orange, Gray, Green, Beige, Gold, Silver Gray |
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
| Physical Properties | Units | ASTM | Results |
|---|---|---|---|
| Density | lb/in3 | D792 | .55 |
| Water Absorption, 24 hrs | % | D792 | <1.0 |
| Mechanical Properties | Units | ASTM | Results |
|---|---|---|---|
| Tensile Strength | psi | D638 | >2150 |
| Tensile Modulus | psi | D638 | 130000 |
| Tensile Elongation @Break | % | D638 | >13 |
| Flexural Strength | psi | D790 | >4600 |
| Compressive Strength | psi | D695 | >900 |
| IZOD Impact Strength Notched | ft-lb/in | D256 | >1.7 |
| Izod Impact Strength Unotched | ft-lb/in | D256 | >1.7 |
| Thermal Properties | Units | ASTM | Results |
|---|---|---|---|
| Coeffcient of Linear Thermal Expansion | x 10^-5 in./in./°F | D256 | 2.483 |
| Heat Deflection Temp at 66 psi | °F | D256 | >135 |
| Thermal Conductivity | BTU-in/ft²-hr-°F | 0.05-0.07 | |
| Flammability Rating | No burn when flame removed |
| Electrical Properties | Units | ASTM | Results |
|---|---|---|---|
| Dielectric Strength. 1/8″ th. | V/mil | D149 | |
| Dielectric Constant @1 MHz | V/mil | D150 | 1.56 |
| Surface Resistivity @60 Hz | ohms/sq | D257 | >1×10^14 |
| Volume Resistivity, 50% RH | ohm-cm | D257 | >1×10^15 |
NOTE: Several grades of this material are available. For additional information regarding this plastic, contact your Emco Industrial Plastics representative or call 973-435-8544.