Displays Resources Gallery Get a Quote

Continuous cast acrylic is a high-quality acrylic sheet with the added value of having a much tighter thickness tolerance vs. cell cast. Continuous cast acrylic is very beneficial if you need the high molecular weight of cast sheet plus the added thickness and width benefits of continuous cast. It is available in thicknesses from .118 to .236 and in sizes up to 108 inches wide and 168 inches long and can be ordered with thermoformable poly-film masking or TufGuard® masking. 


Do you need Fabrication or Machining for Continuous Cast Acrylic?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name
Polymethyl Methacrylate

Available In

ITAR Registered

ACRYLITE® FF, Optix-L, Lucite L

Start Your Quote

Send us a message:

*Required Fields


Technical Information

Stock Products Properties Applications Advantages Grades

Stock Products

Sheet .118″ to 2″ 48″ x 96″ Clear, Black, Bronze, Green, Gray, White

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.


Physical PropertiesUnitsASTMResults
Density g/cm3 D792 1.16
Water Absorption. 24 hrs % D570 0.3
Mechanical PropertiesUnitsASTMResults
Tensile Strength @yield psi D638 8.000 – 11.000
Tensile Modulus psi D638 350.000 – 500.000
Tensile Elongation @Break % D638 2
Flexural Strength psi D790 12.000 – 17.000
Flexural Modulus psi 400000 350.000 – 500.000
Compressive Strength psi D695 11.000 – 19.000
Hardness. Rockwell R D785 M80 – M100
IZOD Impact Strength Notched ft-lb/in D256 0.3
Thermal PropertiesUnitsASTMResults
Coefficient of Linear Thermal Expansion (x 10-5 in./in./°F) D256 5 – 9
Heat Deflection Temp at 264 psi °F 150 – 65
Melting Temperature °F D3418 265 – 130
Max Operating Temp °F 150 – 65
Thermal Conductivity BTU-in/ft2-hr-°F C177 3.9
Electrical PropertiesUnitsASTMResults
Dielectric Strength V/mil D149 400
Dielectric Constant D150 4
Dissipation Factor @ 60 Hz D150 0.05
Optical PropertiesUnitsASTMResults
3mm Transparent Clear Transmittance. Total (%) % D1003 92
Refractive Index % D542 D542
NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.


  • Glazing. skylights
  • Aquariums
  • Lenses and lighting fixtures
  • Housings
  • Signage
  • Point of purchase displays


  • Excellent performance in fabricating & thermoforming
  • Outstanding weather resistance
  • Uniform thickness consistency
  • Ten times stronger than glass and half the weight
  • Available in clear, colors, and solar colors
  • Available with thermoformable poly-film masking or TufGuard masking.


  • Cell Cast
  • Extruded
Copyright © 2016 - 2024 Emco Industrial Plastics