Celtec® is a foamed polyvinyl chloride (PVC) sheet whose outstanding combination of properties make it perfect for store fixtures, point of purchase displays, exhibits, signage, kiosks, store displays, dimensional letters, and more.
Celtec® Ultra White is an advanced solid PVC specifically designed for outdoor applications where resistance to ultraviolet (UV) degradation and impact strength are critical. Cletec® Ultra White is up to eight times more resistant to UV damage and is digital and screen printable.
Emco Industrial Plastics doesn’t claim to represent all of the manufacturers or trade name products listed. This list is intended as a guide of typical materials available for purchase from Emco Industrial Plastics, Inc. For additional information, contact an Emco Industrial Plastics by filling out the form below.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
Polyvinyl Chloride
Available In
Sheet
Certifications
UL 94 V-0, UL94 5V, UL-1975, FDA Incidental Food Contact, RoHS Compliant, ITAR Registered
Start Your Quote
Send us a message:
*Required Fields
| Type | Size | Length | Color |
|---|---|---|---|
| Sheet | 2mm, 3mm, 6mm | 4’x8′ | White |
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
| Physical Properties | Units | ASTM | Results |
|---|---|---|---|
| Density | g/cm^3 | D792 | 1.42 |
| Water Absorption, 24 hrs | % | D570 | 0.06 |
| Shore Durometer | D | D2240 | 89 |
| Mechanical Properties | Units | ASTM | Results |
|---|---|---|---|
| Tensile Strength | psi | D638 | 7,500 |
| Tensile Modulus | psi | D638 | 411,000 |
| Flexural Strength | psi | D790 | 12,800 |
| Flexural Modulus | psi | D790 | 481,000 |
| Nail Hold | Lbf/in of penetration | D1761 | 35 |
| Screw Hold | Lbf/in of penetration | D1761 | 680 |
| Staple Hold | Lbf/in of penetration | D1761 | 180 |
| Gadner Impact | in/lbs | D4228 | 103 |
| Hardness, Rockwell | R Scale | D785 | 115 |
| Izod Impact Strength, notched | ft-lb/in | D256 | 1 |
| Izod Impact Strength Unotched | ft-lb/in | D256 | 4.5-8.1 |
| Thermal Properties | Units | ASTM | Results |
|---|---|---|---|
| Coefficient of Linear Thermal Expansion | 3.2 x 10^-5 | ||
| Heat Deflection Temp at 66 psi | °F | D648 | 179 |
| Vicat Softening Point | °F | D1525 | 181 |
| Max Operating Temp. | °F | 480 | |
| Thermal Conductivity | W/mK | D177 | 0.084 |
| Electrical Properties | Units | ASTM | Results |
|---|---|---|---|
| Dielectric Strength. 1/8″ th. | V/mil | D149 | 544 |
| Dielectric Constant @1 MHz | D150 | 319 | |
| Dissipation [email protected] MHz | D150 | 0.0096 | |
| Volume Resistivity, 50% RH | ohm-cm | D257 | 5.4×10^15 |
