Displays Resources Gallery Get a Quote

Boltaron® 4050 is high impact, high corrosion resistant, Type II PVC sheet with an industrial smooth finish on both sides. Boltaron® 4050 is suitable for thermoforming and conforms to ASTM D-1784.

Do you need Fabrication or Machining for Boltaron 4050?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name
Polyvinyl Chloride

Available In

UL94 V-0, Conforms to ASTM D-1784 standards, ITAR Registered

Start Your Quote

Send us a message:

*Required Fields


Technical Information

Stock Products Properties Applications Advantages

Stock Products

Sheet .032” – 2” 48” x 96” Gray

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.


Physical PropertiesUnitsASTMResults
Density g/cm^3 D792 1.35
Mechanical PropertiesUnitsASTMResults
Tensile Strength @ yield psi D638 5600
Tensile Elongation @Break % D638 122
Flexural Strength MPa D790 8000
Flexural Modulus psi 3.0×10^5
Compressive Strength psi D695 8000
Hardness, Rockwell 116
IZOD Impact Strength Notched kJ.m^2 D785 10.0-15.0
Thermal PropertiesUnitsASTMResults
Coeffcient of Linear Thermal Expansion x10^-5/K 3.2×10^-5
Heat Deflection Temp at 264 psi °F C177 160
Thermal Conductivity W/mK C177 0.74
Flammability Rating V-0
Electrical PropertiesUnitsASTMResults
Dielectric Strength. 1/8″ th. kV/mm D149 335
Dielectric Constant D150 2.85
Dissipation Factor@1 MHz D150 0.016
Volume Resistivity, 50% RH ohm-cm D257 1.8


  • Fume hoods & ducts
  • Machined parts
  • Fume scrubbers
  • Acid etching machines
  • Acid tanks & linings


  • Solid, monolithic strength
  • Free of pits, voids, & inclusions
  • Extreme chemical resistance
  • Readily machined
Copyright © 2016 - 2024 Emco Industrial Plastics