Acrylite® Soundstop is a specialty product that offers effective noise control and wind protection. The sheets are sound-reflecting, impact resistant, highly transparent and contain embedded polyamide threads for silver retention. They are also available with bird-deterrent strips. Acrylite® Soundstop Masonry Wall System adds attractive transparent panels to masonry block noise barrier walls. This easy to install system improves the look of the wall while reducing overall installation time and project cost. A single Acrylite® Soundstop panel can replace up to one hundred masonry blocks and allow continued unobstructed views. Acrylite® Soundstop Ready Fit Panels are fully fabricated frame-and-panel assemblies, adaptable to any ground-mounted noise barrier system. Incorporating Acrylite® Soundstop sheet, these panels can be substituted anywhere on a noise wall where the designer needs to provide an opening for light and view. The result is a cost effective “win-win” solution to visibility and noise abatement problems. Acrylite® Soundstop TL4 System is a safe, lightweight noise barrier system for bridges and elevated roadway applications. It has been successfully crash tested to NCHRP 350 Level 4 conditions and shown to reduce the severity of a collision with the bridge rail. The system incorporates Acrylite® Soundstop GS CC panels, meeting the fragment retention requirements of EN 1794 to ensure there are no breakaway debris hazards resulting from a vehicle collision with the wall. Acrylite® Soundstop GS CC Noise Barrier sheet has a fragment retention feature which controls falling debris resulting from collision. Incorporating all of the characteristics of Acrylite® Soundstop sheet, it is ideal for use on bridges and overpasses.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
Acrylic
Available In
Sheet, Tube
Certifications
ITAR Registered
Start Your Quote
Send us a message:
*Required Fields
Type | Size | Length | Color |
---|---|---|---|
Sheet | 15 mm, 20mm, 25mm | up to 20′ | Clear |
Tube |
Finishes: Stripe specification available upon request
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
Physical Properties | Units | ASTM | Results |
---|---|---|---|
Density | D792 | 1.19 |
Mechanical Properties | Units | ASTM | Results |
---|---|---|---|
Tensile Strength @ yield | psi | D638 | 10000 |
Tensile Modulus | MPa | ISO 527 | |
Tensile Elongation @Break | % | D638 | |
Flexural Strength | MPa | 17000 | |
Flexural Modulus | psi | ||
Compressive Strength | psi | D695 | 17000 |
IZOD Impact Strength Notched | kJ.m^2 | D256 |
Thermal Properties | Units | ASTM | Results |
---|---|---|---|
Coeffcient of Linear Thermal Expansion | ISO 11359 | ||
Expansion Due to Heat & Moisture | ft | ||
Maximum Service Temperature | °F | ||
Smoke Density Rating | % | D2843 | |
Rate of Burn | D635 |
Electrical Properties | Units | ASTM | Results |
---|---|---|---|
Surface Resistivity @60 Hz | ohms/sq | D257 | |
Volume Resistivity, 50% RH | ohm-cm | D250 |
Optical Properties | Units | ASTM | Results |
---|---|---|---|
Lumminous Transmission | % | 92 | |
Refractive Index | % | D542 | 1.49 |
NOTE: Several grades of this material are available. For additional information regarding this plastic, contact your Emco Industrial Plastics representative or call 973-947-6000.