Displays Resources Gallery Get a Quote

The solid sheets are equally suitable for manufacturing structured Fresnel lenses by hot embossing and as a substrate for manufacturing laminated lenses, which involves laminating structured films or injection-molded lenses into the sheets. Their special properties are precise mold surface reproduction, high transmittance and excellent resistance to weathering and UV light. The new Acrylite® Solar Pre-Fab Lens Panel provides assemblers with a high precision CPV primary optical element optimized for use in the Ventana Optical Train. It utilizes Light Prescriptions Innovators’ (LPI) patented Fresnel-Kohler (FK) Concentrator design and is manufactured in proprietary access.

Do you need Fabrication or Machining for Acrylite Solar?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name

Available In
Sheet, Tube

ITAR Registered

Start Your Quote

Send us a message:

*Required Fields


Technical Information

Stock Products Properties Applications Advantages Grades

Stock Products

Sheet 3 & 4mm 1,219 x 2,438 mm

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.


Physical PropertiesUnitsASTMResults
Density ISO 1183 1.19
Mechanical PropertiesUnitsASTMResults
Tensile Strength @ yield psi D638
Tensile Modulus MPa ISO 527 3300
Tensile Elongation @Break % D638
Flexural Strength MPa
Flexural Modulus psi
Compressive Strength psi D695
IZOD Impact Strength Notched kJ.m^2 D256
Thermal PropertiesUnitsASTMResults
Coeffcient of Linear Thermal Expansion ISO 11359 8
Expansion Due to Heat & Moisture ft
Maximum Service Temperature °F
Smoke Density Rating % D2843
Rate of Burn D635
Electrical PropertiesUnitsASTMResults
Surface Resistivity @60 Hz ohms/sq D257
Volume Resistivity, 50% RH ohm-cm D250
Optical PropertiesUnitsASTMResults
Lumminous Transmission % 92
Refractive Index % D542


  • Covers for built in photovolatics
  • Hot embossing of radial and linear Fresnel lenses for CPV/CSP applications


  • UV transmission is specially adjusted to photovolatic applications (PV, CPV)
  • Provides better energy conversion efficiency and module efficiency
  • Longer service of photo cells, lenses and covers
  • High mechanical strength
  • Scratch resistant
  • Ease of processing
  • Good thermoformability
  • High heat deflection temperature


NOTE: Several grades of this material are available. For additional information regarding this plastic, contact your Emco Industrial Plastics representative or call 973-947-6000.

Copyright © 2016 - 2024 Emco Industrial Plastics