Acrylite® Optical Anti-Reflective is an ideal glazing material for optical displays, improving screen clarity with more than 97% light transmission. It cuts glare to less than 2% total light reflectance allowing displays to be easily viewed from any angle regardless of lighting conditions. With many times the impact strength of glass and greater mar resistance than un-coated sheet, it provides added protection and increased durability for front panel displays, i.e. PDA, LCD, CRT, PDP and instrument clusters. For added protection, Acrylite® Optical Anti-Reflective sheet has an abrasion resistant coating that prevents marring and scratching.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
Acrylic
Available In
Sheet
Certifications
ITAR Registered
Start Your Quote
Send us a message:
*Required Fields
Type | Size | Length | Color |
---|---|---|---|
Sheet | 2mm, 3mm | 41” x 71” CTS | Colorless |
Physical Properties | Units | ASTM | Results |
---|---|---|---|
Approximate Area Weight | lbs/ft^2 | 0.7 |
Mechanical Properties | Units | ASTM | Results |
---|---|---|---|
Tensile Strength @ yield | psi | D638 | |
Tensile Modulus | MPa | D638 | |
Tensile Elongation @Break | % | D638 | |
Flexural Strength | MPa | ||
Flexural Modulus | psi | ||
Compressive Strength | psi | D695 | |
IZOD Impact Strength Notched | kJ.m^2 | D256 |
Thermal Properties | Units | ASTM | Results |
---|---|---|---|
Coeffcient of Linear Thermal Expansion | in/in/°F | D696 | 0.00005 |
Expansion Due to Heat & Moisture | ft | 1/16″ | |
Maximum Service Temperature | °F | 160 | |
Smoke Density Rating | % | D2843 | 8.1 |
Rate of Burn | D635 | C2/CC2 |
Electrical Properties | Units | ASTM | Results |
---|---|---|---|
Surface Resistivity @60 Hz | ohms/sq | D257 | |
Volume Resistivity, 50% RH | ohm-cm | D250 |
NOTE: Several grades of this material are available. For additional information regarding this plastic, contact your Emco Industrial Plastics representative or call 973-241-7223.