The new dimension of light: specialty acrylic sheet and rod for efficient lighting applications combined with LEDs. Specialty products for edge lighting and back lighting offer maximum light transmission without disturbing hot spots, as well as attractive color play effects. Acrylite® LED is the perfect solution for edge-lit applications. Light is fed in via the edge of the high transparent material and evenly emitted across the surface. Acrylite® LED is a transparent colorless material offered in various grades and thicknesses. The light transmission of Acrylite® LED sheet is adjusted to the same wavelength ranges as the respective LEDs. The combination of properties make it possible to employ modern LED technology with maximum brightness.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
Acrylic
Available In
Sheet
Certifications
ITAR Registered
Start Your Quote
Send us a message:
*Required Fields
| Type | Size | Length | Color |
|---|---|---|---|
| Sheet | .118″ | 80” x 120” CTS | White |
| Physical Properties | Units | ASTM | Results |
|---|---|---|---|
| Approximate Area Weight | lbs/ft^2 | 0.7 |
| Mechanical Properties | Units | ASTM | Results |
|---|---|---|---|
| Tensile Strength @ yield | psi | D638 | |
| Tensile Modulus | MPa | D638 | |
| Tensile Elongation @Break | % | D638 | |
| Flexural Strength | MPa | ||
| Flexural Modulus | psi | ||
| Compressive Strength | psi | D695 | |
| IZOD Impact Strength Notched | kJ.m^2 | D256 |
| Thermal Properties | Units | ASTM | Results |
|---|---|---|---|
| Coeffcient of Linear Thermal Expansion | in/in/°F | D696 | 0.00005 |
| Expansion Due to Heat & Moisture | ft | 1/16″ | |
| Maximum Service Temperature | °F | 160 | |
| Smoke Density Rating | % | D2843 | 8.1 |
| Rate of Burn | D635 | C2/CC2 |
| Electrical Properties | Units | ASTM | Results |
|---|---|---|---|
| Surface Resistivity @60 Hz | ohms/sq | D257 | |
| Volume Resistivity, 50% RH | ohm-cm | D250 |
NOTE: Several grades of this material are available. For additional information regarding this plastic, contact your Emco Industrial Plastics representative or call 973-241-7223.