DisplaysResourcesSpecialsGalleryGet a Quote

Nylatron® LIG combines the toughness of cast PA6 with an oil-based lubricant that is within the nylon matrix. It increases the load bearing performance of the material when compared to unfilled nylons and reduces the coefficient of friction. It is an ideal material for industrial application.

Do you need Fabrication or Machining for Nylatron LIG PA6?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name
Polyamide

Available In
Sheet, Rod

Start Your Quote

Send us a message:

*Required Fields

Gallery

Technical Information

Stock Products Properties Applications Advantages

Stock Products

TypeSizeLengthColor
Sheet 1/16″ – 2″ TH 12″ x 24″, 24″ x 48″, 12″ x 48″ Green
Rod 3/16″ – 2″ DIA 96″ Green

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.

Properties

Physical PropertiesUnitsASTMResults
Specific Gravity g/cc D792 1.14
Water Absorption. 24 hrs % D570 0.30
Mechanical PropertiesUnitsASTMResults
Elongation @ Break, 73°F % D638 50
Flexural Strength, 73°F psi D790 15,000
Flexural Modulus, 73°F ksi D790 525
Compressive Strength @10% psi D695 13,500
Shear Strength psi D732 9,300
Rockwell Hardness M scale D785 85
Coefficient of Friction D696 .14
Tensile Strength psi D638 9,900
Thermal PropertiesUnitsASTMResults
Maximum Serice Temperature °F UL746B 220
Melting Point °F D3418 420
Flammability UL94 HB
Electrical PropertiesUnitsASTMResults
Dielectric Strength kV/in D149 NA
NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.

Applications

  • Sheaves
  • Sprockets
  • Rollers
  • Wheels
  • Wear Components
  • Wear Pads
  • Gears

Advantages

  • Good mechanical and electrical properties
  • Ideal balance of strength and toughness
  • Internally lubricated
  • Cast as finished parts and near net shapes
Copyright © 2016 - 2017 Emco Industrial Plastics