Acrylite® Hi-Gloss is a co-extruded sheet with a super thin layer of color or pattern topped with crystal clear premium acrylic. This perfectly combined product provides the depth, luminosity and high-end gloss look at a fraction of the cost of similar solutions such as back painted glass. Acrylite® Hi-Gloss is available in solid colors and decorative patterns. As a co-extruded product the color is an inherent part of the acrylic and can withstand almost any fabrication method. This process creates a major advantage over other processes that call for additional coatings such as painting or lamination. Acrylite® sheet manufactured with this technique has excellent surface quality, thickness tolerance and has all the advantages of acrylic; lightweight, impact resistant, UV stable and weather resistant. Acrylite® Hi-Gloss offer amazing versatility and unsurpassed depth for your most discriminating designs.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
Acrylic
Available In
Sheet, Decorative Paterns
Certifications
ITAR Registered
Start Your Quote
Send us a message:
*Required Fields
| Type | Size | Length | Color |
|---|---|---|---|
| Sheet | 6mm | 48” x 96” CTS | White, Silver White, Lemon, Taupe, Red |
| Decorative Patterns | Floral Night, Brushed Aluminum, Timber |
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
| Physical Properties | Units | ASTM | Results |
|---|---|---|---|
| Approximate Area Weight | lbs/ft^2 | 0.7 |
| Mechanical Properties | Units | ASTM | Results |
|---|---|---|---|
| Tensile Strength @ yield | psi | D638 | |
| Tensile Modulus | MPa | D638 | |
| Tensile Elongation @Break | % | D638 | |
| Flexural Strength | MPa | ||
| Flexural Modulus | psi | ||
| Compressive Strength | psi | D695 | |
| IZOD Impact Strength Notched | kJ.m^2 | D256 |
| Thermal Properties | Units | ASTM | Results |
|---|---|---|---|
| Coeffcient of Linear Thermal Expansion | in/in/°F | D696 | 0.00005 |
| Expansion Due to Heat & Moisture | ft | 1/16″ | |
| Maximum Service Temperature | °F | 160 | |
| Smoke Density Rating | % | D2843 | 8.1 |
| Rate of Burn | D635 | C2/CC2 |
| Electrical Properties | Units | ASTM | Results |
|---|---|---|---|
| Surface Resistivity @60 Hz | ohms/sq | D257 | |
| Volume Resistivity, 50% RH | ohm-cm | D250 |
NOTE: Several grades of this material are available. For additional information regarding this plastic, contact your Emco Industrial Plastics representative or call 973-241-7223.
