| Q | MIL-M-14G | MOLDING PLASTICS AND MOLDED PLASTIC PARTS, THERMOSETTING |
| MIL-P-79C(2) | PLASTIC ROD AND TUBE, THERMOSETTING, LAMINATED | |
| MIL-W-80C | WINDOW, OBSERVATION, ACRYLIC BASE, ANTI-ELECTROSTATIC, TRANSPARENT (INDICATING INSTRUMENT) | |
| BQ | MIL-I-631D(5) | INSULATION, ELECTRICAL, SYNTHETIC RESIN COMPOSITION, NON-RIGID |
| MIL-I-742F(1) | INSULATION BOARD, THERMAL, FIBROUS GLASS | |
| Q | MIL-P-997D(2) | PLASTIC, LAMINATED, THERMOSETTING, ELECTRICAL INSULATION, SHEETS, GLASS CLOTH, SILICONE RESIN |
| MIL-Y-1140H | YARN, CORD, SLEEVING, CLOTH, AND TAPE-GLASS | |
| MIL-F-1148B(2) | FIBRE, VULCANIZED, ELECTRICAL AND MECHANICAL GRADES | |
| MIL-P-2296B | PLASTIC TUBE, POLYTETRAFLUOROETHYLENE, (TFE-FLUOROCARBON RESIN). HEAVY WALLED | |
| * | MIL-P-2524A | GLASS FIBRE BASE-EPOXY RESIN LOW PRESSURE LAMINATED PLASTIC |
| * | MIL-P-3086 | NON-RIGID POLYAMIDE (NYLON) RESIN |
| * | MIL-P-3115B | THERMOSET PHENOLIC SHEET, PAPER REINFORCED |
| MIL-I-358D | INSULATION TAPE, ELECTRICAL GLASS FIBRE (RESIN FILLED), AND CORD, FIBROUS GLASS | |
| MIL-I-3190B(1) | INSULATION SLEEVING, ELECTRICAL , FLEXIBLE, TREATED | |
| MIL-P-3409(1) | PLASTIC, MOLDING, RIGID THERMOPLASTIC, POLYDICHLOROSTYRENE, ELECTRONIC COMMUNICATIONS | |
| * | MIL-P-3413 | SUPERSEDED BY LM-520 AND LP-396 |
| * | MIL-P-3803 | SUPERSEDED BY LP-512 |
| MIL-I-3825B(3) | INSULATION TAPE, ELECTRICAL, SELF FUSING, FOR USE IN ELECTRONIC COMMUNICATIONS AND ALLIED EQUIPMENT | |
| * | MIL-P-3827 | SUPERSEDED BY LM-525 |
| QL | MIL-P-4640A(3) | PLASTIC FILM, POLYETHYLENE, FOR BALLOON USE |
| Q | MIL-P-5425D | PLASTIC MATERIAL, SHEET, ACRYLIC, HEAT RESISTANT |
| L | MIL-P-5431A(1) | PLASTIC, PHENOLIC, GRAPHITED, SHEETS, RODS, TUBES, AND SHAPES |
| * | MIL-P-6264B | VINYL COPOLYMERS, UNPLASTICIZED, UNPIGMENTED, AND UNFILLED |
| MIL-P-6997B(1) | PLASTIC, WORKING AND INSTALLATION OF TRANSPARENT SHEET, GENERAL SPECS, FOR (ASG) | |
| MIL-I-7444D | INSULATION SLEEVING, ELECTRICAL , FLEXIBLE | |
| MIL-P-8045B(3) | PLASTIC, SELF-SEALING AND NON-SELF-SEALING TANK BACKING MATERIAL | |
| * | MIL-P-8059A | THERMOSET PHENOLIC RESIN SHEETS AND TUBES |
| BL | MIL-P-008184 | PLASTIC SHEET, ACRYLIC, MODIFIED |
| Q | MIL-P-8184C | PLASTIC SHEET, ACRYLIC, MODIFIED |
| * | MIL-P-8257 | POLYESTER BASE, CAST TRANSPARENT SHEET, THERMOSETTING |
| MIL-A-8576C | ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC | |
| MIL-P-8587A | PLASTIC, SHEET, COLORED, INSTRUMENT FLYING TRAINING | |
| * | MIL-P-8655A | THERMOSET PHENOLIC SHEET, POSTFORMING COTTON REINFORCED |
| * | MIL-P-9969 | POLYURETHANE, RIGID, UNICELLULAR, FOAM-IN-PLACE FOR PACKAGING |
| MIL-P-12420C | PLASTIC MATERIAL, CELLULAR, ELASTOMERIC | |
| MIL-P-13436A(1) | PLASTIC SHEET, FILLED PHENOLIC, UNCURED | |
| * | MIL-P-13491 | POLYSTYRENE SHEET, ROD, AND TUBE |
| MIL-P-13949/1 | PLASTIC SHEET, BASE MATERIAL PX, PAPER BASE, EPOXY RESIN, FLAME RETARDANT, COPPER CLAD | |
| MIL-P-13949/3A | PLASTIC SHEET, BASE MATERIAL GE, GLASS BASE, EPOXY RESIN, GENERAL PURPOSE, COPPER CLAD | |
| MIL-P-13949/8B(1) | PLASTIC SHEET, BASE MATERIAL GT, GLASS BASE, POLYTETRAFLUORO-ETHYLENE, FLAME RETARDANT, COPPER CLAD | |
| Q | MIL-P-13949F(3) | PLASTIC SHEET LAMINATED, METAL CLAD, (FOR PRINTED WIRING) GENERAL SPECIFICATION FOR |
| L | MIL-P-14790 | PLASTIC SHEET AND STRIP (POLYOLEFIN) (FOR USE IN AMMUNITION) |
| MIL-P-15035C(4) | PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC RESIN | |
| Q | MIL-P-15037E(3) | PLASTIC SHEET, LAMINATED, THERMOSETTING, GLASS CLOTH, MELAMINE RESIN |
| MIL-P-15047C | PLASTIC MATERIAL, LAMINATED, THERMOSETTING SHEETS, NYLON FABRIC BASE, PHENOLIC RESIN | |
| MIL-I-15126F(2) | INSULATION TAPE, ELECTRICAL, PRESSURE SENSITIVE ADH, AND PRESSURE SENSITIVE THERMOSETTING ADH. | |
| Q | MIL-P-15280H | PLASTIC MATERIAL, UNICELLULAR, (SHEET AND TUBE) |
| * | MIL-P-16413 | METHYL METHACRYLATE MOLDING MATERIALS |
| * | MIL-P-16414 | CELLULOSE ACETATE BUTYRATE MOLDING |
| * | MIL-P-16416 | CELLULOSE ACETATE MOLDING MATERIAL |
| * | MIL-P-17091B | POLYAMIDE (NYLON) RESIN RODS, SHEETS |
| L | MIL-P-17171D | PLASTIC, LAMINATE, DECORATIVE, HIGH PRESSURE |
| L | MIL-I-17276A | INHIBITOR, CELLULOSE ACETATE, EXTRUDED |
| L | MIL-P-17549D | PLASTIC LAMINATES, FIBROUS GLASS REINFORCED, MARINE STRUCTURAL |
| * | MIL-P-17638 | PVC SHEET – HIGH IMPACT |
| MIL-I-18057A(1) | INSULATION SLEEVING, ELECTRICAL, FLEXIBLE, GLASS FIBRE, SILICONE RUBBER TREATED | |
| L | MIL-P-18080A(1) | PLASTIC SHEET, VINYL, FLEXIBLE, TRANSPARENT, OPTICAL QUALITY |
| Q | MIL-P-18177C(1) | PLASTIC SHEET, LAMINATED, THERMOSETTING, GLASS FIBRE BASE, EPOXY RESIN |
| Q | MIL-P-18324D(2) | PLASTIC MATERIAL, LAMINATED PHENOLIC, FOR BEARINGS (WATER OR GREASE LUBRICATION) |
| * | MIL-N-18352 | NYLON PLASTIC, FLEXIBLE MOLDED OR EXTRUDED |
| * | MIL-I-18622A | INSULATION TAPE, ELECTRICAL, PRESSURE SENSITIVE SILICONE, RUBBER TREATED |
| MIL-I-18746B | INSULATION TAPE, GLASS FABRIC, POLYTETRAFLUOROETHYLENE COATED | |
| * | MIL-M-19093 | MOLDING PLASTICS, POLYAMIDE (NYLON), AND MOLDED AND EXTRUDED POLYAMIDE |
| * | MIL-P-19119 | PVC PIPE – HIGH IMPACT |
| Q | MIL-P-19161A(1) | PLASTIC SHEET, LAMINATED, GLASS CLOTH POLYTETRAFLUOROETHYLENE RESIN |
| Q | MIL-I-19166C(1) | INSULATION TAPE, ELECTRICAL, HIGH-TEMPERATURE GLASS FIBRE, PRESSURE SENSITIVE |
| * | MIL-P-19336C | PLASTIC SHEETS, POLYETHYLENE, VIRGIN AND BORATED, NEUTRON SHIELDING |
| Q | MIL-P-19468C | PLASTIC ROD, POLYTETRAFLUOROETHYLENE, MOLDED AND EXTRUDED |
| MIL-P-19644C | PLASTIC MOLDING MATERIAL (POLYSTYRENE FOAM, EXPANDED BEAD) | |
| MIL-P-19735B | PLASTIC MATERIAL, MOLDING, ACRYLIC, COLORED AND WHITE, HEAT RESISTANT, FOR LIGHTING FIXTURES | |
| * | MIL-P-19833B | GLASS FILLED DIALLYLPTHLATE RESIN |
| L | MIL-P-19904A | PLASTIC SHEET, ACRYLONITRILE BUTADIENE STYRENE COPOLYMER, RIGID |
| MIL-P-20689C | PLASTIC, PLASTISOL (FOR COATING METALLIC OBJECTS) | |
| * | MIL-M-20693A | PLASTIC MOLDING MATERIAL, RIGID, POLYAMIDE |
| * | MIL-P-21094B | CELLULOSE ACETATE, OPTICAL QUALITY |
| * | MIL-P-21105C | PLASTIC SHEET, ACRYLIC, UTILITY GRADE |
| MIL-P-21347D | PLASTIC MOLDING MATERIAL, POLYSTYRENE, GLASS FIBRE REINFORCED | |
| * | MIL-M-21470 | POLYCHLOROTRIFLUOROETHYLENE RESIN FOR MOLDING |
| Q | MIL-I-21557B | INSULATION SLEEVING, ELECTRICAL, FLEXIBLE, GLASS FIBRE, VINYL TREATED |
| MIL-P-21922B(1) | PLASTIC RODS AND TUBES, POLYETHYLENE | |
| * | MIL-P-22035 | PLASTIC SHEET, POLYETHYLENE |
| Q | MIL-I-22076B(1) | INSULATION TUBING, ELECTRICAL NON-RIGID, VINYL, VERY LOW TEMPERATURE GRADE |
| * | MIL-P-22096A | PLASTIC, POLYAMIDE (NYLON) FLEXIBLE MOLDING AND EXTRUSION MATERIAL |
| * | MIL-I-22129C | INSULATION SLEEVING, ELECTRICAL, NON-RIGID TEFLON TFE RESIN |
| MIL-P-22241B | PLASTIC SHEET AND FILM POLYTETRAFLUOROETHYLENE (TFE FLUOROCARBON RESIN) | |
| * | MIL-P-22242 | CANCELED – REFER TO MIL-P-22241 |
| * | MIL-P-22270 | PLASTIC FILM, POLYESTER, POLYETHYLENE COATED (FOR I.D. CARDS) |
| MIL-P-22296B | PLASTIC TUBE/TUBING POLYTETRAFLUOROETHYLENE (TFE FLUOROCARBON RESIN), HEAVY WALLED | |
| * | MIL-P-22324A | THERMOSET EPOXY RESIN SHEET, PAPER REINFORCED |
| * | MIL-P-22536 | LOW DENSITY POLYETHYLENE |
| * | MIL-M-22544 | SUPERSEDED BY L-P-1183 |
| L | MIL-P-22581B(1) | PLASTIC SHEET, VIBRATION DAMPING (TYPE MI-D2) |
| * | MIL-T-22742 | INSULATION TAPE, ELECTRICAL, PRESSURE SENSITIVE, TEFLON TFE RESIN |
| * | MIL-P-22748A | PLASTIC MATERIAL FOR MOLDING AND EXTRUSION HIGH DENSITY POLYETHYLENE |
| MIL-I-23053C(2) | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR | |
| Q | MIL-T- 23142B | TAPE, PRESSURE SENSITIVE ADHESIVE, FOR DISSIMILAR METAL SEPARATION |
| L | MIL-P-23536A | POLYETHYLENE PLASTIC SHEET, VIRGIN AND BORATED |
| MIL-I-23594B | INSULATION TAPE, ELECTRICAL, HIGH TEMPERATURE, POLYTETRAFLUORO | |
| ETHYLENE, PRESSURE SENSITIVE | ||
| L | MIL-P-24191C | PLASTIC SHEET, CAST, ACRYLIC, SHIPBOARD APPLICATION (ILLUMINATED AND |
| SIGNAL LIGHTING) | ||
| QL | MIL-I-24204A | INSULATION, ELECTRICAL, HIGH TEMPERATURE, BONDED, SYNTHETIC FIBRE |
| PAPER | ||
| QL | MIL-M-24325(2) | MOLDING MATERIAL PLASTIC, EPOXY COMPOUNDS, THERMOSETTING |
| L | MIL-P-24333(2) | PLASTIC, UNICELLAR, SHEET, ELASTOMERIC |
| L | MIL-P-24364(2) | PLASTIC SHEET, LAMINATED, THERMOSETTING, ELECTRICAL INSULATING |
| SHEET, GLASS MAT | ||
| L | MIL-P-24364/1(3) | PLASTIC SHEET, LAMINATED, THERMOSETTING, ELECTRICAL INSULATING |
| POLYESTER, GLASS MAT GRADE GPO-N1 | ||
| L | MIL-P-24364/2(3) | PLASTIC SHEET, LAMINATED, THERMOSETTING, ELECTRICAL INSULATING |
| POLYESTER, GLASS MAT GRADE GPO-N2 | ||
| L | MIL-P-24364/3(3) | PLASTIC SHEET, LAMINATED, THERMOSETTING, ELECTRICAL INSULATING POLYESTER, GLASS MAT GRADE GPO-N3 |
| Q | MIL-I-24391A(2) | INSULATION TAPE, ELECTRICAL, PLASTIC, PRESSURE SENSITIVE |
| MIL-M-24519B(6) | MOLDING PLASTICS, POLYESTER AND POLYARYLETHER THERMOPLASTIC | |
| Q | MIL-P-25374A(1) | PLASTIC SHEET, ACRYLIC, MODIFIED, LAMINATED |
| MIL-P-25395A | PLASTIC, HEAT RESISTANT, LOW PRESSURE LAMIN. GLASS FIBRE BASE,POLYESTER RESIN | |
| MIL-P-25421B | PLASTIC MATERIAL, GLASS FIBRE BASE, EPOXY RESIN, LOW PRESSURE LAMINATED | |
| MIL-P-25515C | PLASTIC MATERIAL, PHENOLIC RESIN, GLASS FIBRE BASE, LAMINATED | |
| MIL-P-25518B | PLASTIC MATERIALS, SILICONE RESIN, GLASS FIBRE BASE, LOW PRESSURE LAMINATED | |
| Q | MIL-P-25690A(3) | PLASTIC SHEET AND PARTS, MODIFIED ACRYLIC BASE, MONOLITHIC, CRACK PROPAGATION RESISTANT |
| L | MIL-P-25770A | PLASTIC MATERIAL, ASBESTOS BASE, PHENOLIC RESIN, LOW OR HIGH PRESSURE LAMINATES (ASG) |
| * | MIL-P-26692 | PLASTIC TUBES AND TUBING, POLYETHYLENE |
| L | MIL-P-27538A | PLASTIC SHEET FEP FLUOROCARBON UNFILLED, COPPER CLAD |
| * | MIL-T-27730A | TAPE, ANTISEIZE, TETRAFLUOROETHYLENE, WITH DISPENSER |
| MIL-P-38727 | TAPE, PROTECTIVE, PRESSURE SENSITIVE | |
| MIL-P-40619A | PLASTIC, CELLULAR, POLYSTYRENE (FOR BUOYANCY) | |
| * | MIL-T-43036B(1) | TAPE, PRESSURE SENSITIVE ADHESIVE, PLASTIC FILM (FOR SEALING FIBRE CONTAINERS AND CANS) |
| L | MIL-P-43037 | THERMOSET PHENOLIC RESIN ROD, NYLON REINFORCED |
| L | MIL-P-43038B | PLASTIC MOLDING MATERIAL, POLYESTER, LOW PRESSURE LAMINATED, HIGH TEMPERATURE RESISTANCE |
| L | MIL-P-43043C | PLASTIC MOLDING MATERIAL, PRE-MIX, POLYESTER, GLASS FIBRE REINFORCED |
| L | MIL-P-43081B | PLASTIC MOLDING MATERIAL (PLOTTING AND IMPREGNATING), POLYETHYLENE,LOW MOLECULAR WEIGHT |
| L | MIL-P-43090B | PLASTIC MOLDING MATERIAL, ASPHALT, ASBESTOS FILLED |
| L | MIL-P-43604A | PLASTIC TUBING (FLEXIBLE, POLYURETHANE FILM) |
| * | MIL-P-46036B | PLASTIC SHEET, RODS, TUBES, AND DISCS, POLYCHLOROTRIFLUOROETHYLENE |
| * | MIL-P-46040A | PLASTIC SHEET, HEAT RESISTANT, GLASS FABRIC REINFORCED |
| MIL-P-46041 | PLASTIC SHEET, FLEXIBLE VINYL | |
| Q | MIL-A-46050C(2) | ADHESIVE, CYANOACRYLATE, RAPID ROOM TEMPERATURE CURING, SOLVENTLESS |
| * | MIL-P-46058C(6) | INSULATING COMPOUND, ELECTRICAL (FOR COATING PRINTED CIRCUIT ASSEMBLIES) |
| L | MIL-P-46060 | PLASTIC MATERIAL NYLON |
| MIL-P-46067B | PLASTIC EMBEDDING COMPOUND, EPOXY RESIN SYSTEM | |
| MIL-M-46069(2) | MOLDING PLASTIC, GLASS/EPOXY PRE-MIX | |
| L | MIL-A-46106A(2) | ADHESIVE SEALANTS, SILICONE, RTV, GENERAL PURPOSE |
| L | MIL-P-46109C | PLASTIC MOLDING MATERIAL, POLYPROPYLENE, GLASS FIBRE REINFORCED |
| L | MIL-P-46112B | PLASTIC SHEET AND STRIP, POLYIMIDE |
| L | MIL-P-46115B | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE |
| L | MIL-P-46120B | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYSULFONE |
| * | MIL-P-46121B | PLASTIC SHEET AND COATING MATERIAL, PARAXYLYLENE POLYMERS |
| L | MIL-P-46122 | PLASTIC MOLDING MATERIAL, POLYVINYLIDENE FLUORIDE-KYNAR |
| L | MIL-P-46122B | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYVINYLIDENE FLUORIDE POLYMER AND COPOLYMER |
| MIL-P-46124B | PLASTIC MOLDING AND EXTRUSION MATERIAL, IONOMER RESINS | |
| MIL-P-46129A | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE, MODIFIED | |
| L | MIL-P-46131B | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE, MODIFIED, GLASS FIBRE REINFORCE |
| MIL-P-46133A | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLY (ARYL SULFONE ETHER) RESIN, THERMOPLASTIC | |
| MIL-P-46137A | PLASTIC MOLDING AND EXTRUSION MATERIAL, ACETAL, GLASS FIBRE REINFORCED | |
| L | MIL-P-46140B | PLASTIC SHEET, PRESSURE SENSITIVE, ADHESIVE COATED, CELLULOSE ACETATE, TRANSPARENT |
| MIL-P-46144B | PLASTIC SHEET, POLYCARBONATE | |
| L | MIL-A-46146A(2) | ADH.-SEALANTS, SILICONE, RTV, NON-CORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT) |
| L | MIL-P-46161A | PLASTIC MOLDING MATERIAL, POLYTEREPHTHALATE THERMOPLASTIC, GLASS FIBRE REINFORCED |
| L | MIL-P-46166(1) | PLASTIC LAMINATES, GLASS REINFORCED (FOR USE IN ARMOR COMPOSITES) |
| L | MIL-P-46169A | PLASTIC, SHEET MOLDING COMPOUND, POLYESTER, GLASS FIBRE REINFORCED (FOR GENERAL PURPOSE) |
| L | MIL-P-46179 | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYAMIDE IMIDE |
| L | MIL-P-46180 | PLASTIC MOLDING MATERIAL, POLYAMIDE (NYLON), GLASS FIBRE REINFORCED |
| MIL-P-46181 | PLASTIC MOLDING MATERIAL, POLYAMIDE (SUPER TOUGH NYLON) | |
| L | MIL-P-46183 | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYETHERETHERKETONE (PEEK) |
| MIL-P-46184 | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYETHERIMIDE (PEI) | |
| L | MIL-P-46185 | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYETHERSULFONE |
| L | MIL-M-46861A | MOLDING MATERIAL, GLASS MAT. EPOXY COATED |
| L | MIL-M-46862A | MOLDING MATERIAL, GLASS, EPOXY IMPREGNATED |
| L | MIL-M-46891A | MOLDING COMPOUND, PHENOLIC RESIN, ASBESTOS REINFORCED |
| L | MIL-P-46892A | PLASTIC MOLDING MATERIAL, EPOXY, GLASS FIBRE |
| L | MIL-R-47211(1) | RUBBER, SILICONE, ROOM TEMPERATURE CURING |
| L | MIL-P-51402 | PLASTIC SHEET, POLYPROPYLENE POLYETHYLENE LAMINATE FILM |
| L | MIL-P-51403 | PLASTIC SHEET, VINYL, FLEXIBLE |
| L | MIL-P-51406A | PLASTIC SHEET, VINYL CHLORIDE POLYMER AND COPOLYMER, FLEXIBLE |
| L | MIL-P-51431 | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE BUTENE 1 COPOLYMER, HIGH DENSITY |
| L | MIL-P-51432 | PLASTIC, POLYETHYLENE BUTENE 1 COPOLYMER |
| * | MIL-P-51433 | PLASTIC TUBE, POLYETHYLENE BUTENE 1 COPOLYMER |
| MIL-P-52189 | THERMOSET PHENOLIC RESIN TUBE, NYLON REINFORCED | |
| L | MIL-P-55010A | PLASTIC SHEET, POLYETHYLENE TEREPHTHALATE |
| * | MIL-S-55557A(1) | SHELTER ELECTRICAL EQUIP.S-330()/TRC-117(V) |
| MIL-P-55617 | PLASTIC SHEET, FIBERGLASS AND EPOXY RESIN, THIN GAUGE | |
| L | MIL-P-58102(1) | PLASTIC SHEET AND LAMINATES, FLEXIBLE, FOR ENVIRONMENTAL PROTECTIVE STORAGE AND SHIPPING SYS |
| L | MIL-P-63462 | PLASTIC MOLDING AND EXTRUSION MATERIAL, ETHYCELLULOSE, FOR ROCKET GRAIN INHIBITING MAT’LS |
| * | MIL-P-81255A | PLASTIC MOLDING MATERIAL, ASBESTOS PHENOLIC |
| MIL-T-81287 | TAPE, PRESSURE SENSITIVE ALUMINUM FOIL, SILICONE ADHESIVE | |
| L | MIL-P-81390 | PLASTIC MOLDING MATERIAL,POLYCARBONATE, GLASS FIBRE REINFORCED |
| L | MIL-P-82540(1) | PLASTIC MATERIAL, POLYESTER RESIN, GLASS FIBRE BASE, FILAMENT WOUND TUBE |
| L | MIL-P-82650(1) | PLASTIC MOLDING MATERIAL, GLASS PHENOLIC |
| L | MIL-P-83310 | PLASTIC SHEET, POLYCARBONATE, TRANSPARENT |
| MIL-M-87176 | MOLDING MATERIAL, POLYPROPYLENE MODIFIED MECHANICAL ONLY | |
| (*) CANCELED SPECIFICATION. | ||
| (Q) INDICATES THAT ONLY THOSE PRODUCTS WHICH HAVE BEEN TESTED AND APPROVED BY THE GOVERNMENT AND ARE LISTED ON THE OFFICIAL QUALIFIED PRODUCTS LIST PRINTED BY THE GOVERNMENT CAN BE SUPPLIED TO THE SPECIFICATION. THE PRODUCTS MUST ALSO MEET ALL SPECIFICATION REQUIREMENTS. | ||
| (L) TO THE LEFT OF THE DOCUMENT NUMBER INDICATES A LIMITED COORDINATION DOCUMENT. | ||
Start Your Quote
Send us a message:
*Required Fields