Turcite® X is a fluoropolymer based material designed for low load and high speed applications, and is easily machined. It is a very structurally stable material because of its low expansion properties. Typical applications are bearings and bushings. Turcite® X has minimal hygroscopic characteristics and low thermal expansion properties, resulting in a structurally stable material.
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining ServicesGeneric Name
Polytetrafluoroethylene
Available In
Rod
Start Your Quote
Send us a message:
*Required Fields
| Type | Size | Length | Color |
|---|---|---|---|
| Rod | ¼” – 2” | 1’ – 8’ | Red |
| Rod | 2 ½” – 3 ½” | 1’ – 4’ | Red |
| Rod | 4” – 6” | 1’ Only | Red |
| Physical Properties | Units | ASTM | Results |
|---|---|---|---|
| Density | lb/in³ | D792 | 3.1 |
| Mechanical Properties | Units | ASTM | Results |
|---|---|---|---|
| Tensile Strength | psi | D638 | 2000 |
| Tensile Elongation @Break | % | D638 | 170 |
| Hardness, Rockwell | D256 | 50-60 |
