Tuffak® CM-2 is designation for Tuffak® polycarbonate sheet with a durable, clear coating that significantly increases the abrasion resistance of Tuffak® sheet in typical exposures such as washing operations, airborne dust and dirt, and non-abusive public contact. In addition, the abrasion-resistant coating significantly increases the weatherability and chemical resistance of Tuffak® sheet and has essentially the same physical properties of the Tuffak® polycarbonate substrate. The effectiveness of Tuffak® CM-2 polycarbonate sheet has been established by laboratory tests and outdoor weathering. Tuffak® CM-2 sheets are coated on one or both sides and shipped with a protective masking on both sides. The sheets are supplied in a wide range of standard sizes and thicknesses in both clear and transparent tints.
Do you need Fabrication or Machining for Tuffak CM-2?
Contact us today for your fabrication and machining needs!
Request Fabrication/Machining Services
At a Glance
Generic Name Polycarbonate
Available In Sheet
Start Your Quote
Send us a message:
1/8″ – 1/2″
48” x 96” CTS
Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.
Tensile Strength @ yield
Tensile Elongation @Break
IZOD Impact Strength Notched
Coeffcient of Linear Thermal Expansion
Heat Deflection Temp at 264 psi
Surface Resistivity @60 Hz
Volume Resistivity, 50% RH
3mm Transparent Clear Transmittance. Total (%)
Mass transit glazing
Glazing for off highway vehicles
Glazing for showcase displays
High impact resistance
Excellent abrasion resistance
Increased chemical resistance
Request a Quote TodayA member of our team will get with you right away!Request a Quote »