DisplaysResourcesSpecialsGalleryGet a Quote

If static electricity poses a significant problem in your manufacturing environment, take action by choosing TIVAR® ESD or TIVAR® EC. With a surface resistivity range of 105 to 109 (ohms/sq) TIVAR® ESD handles tough conditions where dust and static electricity can cause problems. TIVAR® ESD is an ideal material to use when potentially volatile conditions exist, such as those in grain elevators and munitions plants, effectively safeguarding against static discharges. In addition, it resists heat and protects robotics and other products that are sensitive to dust accumulation and electrical charge buildup.  Where you need the material to be conductive, TIVAR® EC provides a surface resistivity of <105. Both Black TIVAR® ESD and TIVAR® EC are available in two standard sheet sizes: 48″ x 120″ sheets with gauge sizes ranging from 1/16″ to 6″; 60″ x 120″ sheets with gauge sizes ranging from 3/8″ to 1″. TIVAR® ESD is also available in rod, board, tube, tape and profiles.

Do you need Fabrication or Machining for Tivar ESD/EC CleanStat?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name
Ultra High Molecular Weight Polyethylene

Available In
Sheet, Rod, Tube, Profile

Start Your Quote

Send us a message:

*Required Fields

Gallery

Technical Information

Stock Products Properties Applications Advantages Grades

Stock Products

TypeSizeLengthColor
Sheet 1/16″ – 6″ 48 x 120 CTS Black
Rod Call For Sizes Black
Tube Call For Sizes Black
Profile Call for Shapes

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.

Properties

Physical PropertiesUnitsASTMResults
Density g/cm³ D792 0.940
Water Absorption, 24 hrs % D570 <0.010
Mechanical PropertiesUnitsASTMResults
Tensile Strength psi D638 5800
Comprehensive Strength psi D695 3300
Ball Indentation Hardness
Shore Hardness D2240 66
Izod Impact, Notched D256 NB
Compressive Modulus ksi D695 100
Thermal PropertiesUnitsASTMResults
Deflection Temperature at 1.8 MPa (264 psi) °F D648 116
Maximum Service Temperature, Air °F Long Term 180
Melting Temperature °F D648 275
Flammability, UL94 1/8″ HB
CTE, linear °F E831 110

NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.

Applications

  • Assembly conveyor components
  • Bearings
  • Chain guides
  • Chute liners
  • Conveyor components
  • Discharge spout liners
  • Flights
  • Guide rails
  • Robotic parts
  • Slide liners

Advantages

  • Protects against electrical charge build-up
  • Reduces noise
  • Self-lubricating
  • Corrosion resistant
  • No moisture absorption

Grades

NOTE: Several grades of this material are available. For additional information regarding this plastic, contact your Emco Industrial Plastics representative or call 973-862-4148.

Copyright © 2016 - 2017 Emco Industrial Plastics