DisplaysResourcesSpecialsGalleryGet a Quote

Tecaform® AD is a versatile engineering plastic with high strength and dimensional stability. Tecaform® AD is suitable for a wide range of applications. It is characterized by its resistance to organic solvent and outstanding machinability. Tecaform® AD also demonstrates good sliding and abrasion behavior together with low water absorption properties.

Do you need Fabrication or Machining for Tecaform AD Copolymer?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name
Polyoxymethylene

Available In
Sheet, Rod, Tube, Film

Certifications
ITAR Registered

Start Your Quote

Send us a message:

Gallery

Technical Information

Stock Products Properties Applications Advantages

Stock Products

TypeSizeLengthColor
Sheet .060 – 6” 24” x 48’, 12” x 48”, 48” x 96” Natural & Black
Rod 1/8” – 12” 96”, 120” Natural & Black
Tube ½” – 4” ID 120” Natural
Film .010 – .060 Natural & Black

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.

Properties

Physical PropertiesUnitsASTMResults
Density lb/in³ D792 0.054
Water Absorption, 24 hrs % D570 0.2
Mechanical PropertiesUnitsASTMResults
Tensile Strength @ yield psi D638 10
Tensile Modulus psi D638 400
Tensile Elongation @Break % D638 30
Flexural Strength psi D790 12
Flexural Modulus psi D790 400
Compressive Strength psi D695 15
Compressive Modulus psi D695 400
Hardness, Rockwell R D785 120
IZOD Impact Strength Notched ft-lb/in D256 1
Thermal PropertiesUnitsASTMResults
Coeffcient of Linear Thermal Expansion (x 10^-5 in./in./°F) 5.4
Heat Deflection Temp at 264 psi °F 220
Melting Temperature °F 335
Max Operating Temp. °F 180
Thermal Conductivity BTU-in/ft²-hr-°F 1.6
Flammability Rating HB
Electrical PropertiesUnitsASTMResults
Dielectric Strength. 1/8″ th. V/mil D149 420
Dielectric Constant @1 MHz 3.8
Dissipation Factor@1 MHz D150 3.8
Volume Resistivity, 50% RH ohm-cm D257 1015
NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.

Applications

  • Bearing
  • Bushings
  • Electrical Components
  • Gears
  • Rollers
  • Structural Keels

Advantages

  • Excellent wear resistance
  • Very good strength, stiffness
  • Good heat resistance
  • Excellent chemical resistance
  • Opaque
Copyright © 2016 - 2017 Emco Industrial Plastics