DisplaysResourcesSpecialsGalleryGet a Quote

Plexiglas® Arena acrylic sheet is designed specifically for indoor arena glazing. It is made via the Plexiglas® cell cast process, which allows for the highest optical properties using state of the art acrylic sheet manufacturing technology. Plexiglas® Arena acrylic sheet does not shatter like glass when broken. It is nearly half the weight of tempered glass, which allow for quicker and easier change outs, if needed. Plexiglas® Arena sheet is available in two thicknesses, full gauge 0.625 for the highest energy impact zone behind the goal area, and full gauge 0.500 for the sides of the arena. For those heavy usage arenas, and abrasion resistant version – Plexiglas® Arena AR acrylic sheet – is also offered. Plexiglas® Arena AR provides enhanced chemical resistance compared to un-coated sheet, which will allow for easier cleaning ad extended service life.

Do you need Fabrication or Machining for Plexiglas Arena?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name
Acrylic

Available In
Sheet

Start Your Quote

Send us a message:

*Required Fields

Gallery

Technical Information

Stock Products Properties Applications Advantages Grades Downloads

Stock Products

TypeSizeLengthColor
Sheet 0.500″ or 0.625″ 48” x 96” to 72″ x 96″CTS Clear
Other Shapes

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.

Properties

Physical PropertiesUnitsASTMResults
Density g/cm³ D792 1.19
Mechanical PropertiesUnitsASTMResults
Tensile Strength @ yield psi D638 10500
Tensile Modulus MPa D638 450000
Tensile Elongation @Break % D638 4.9
Flexural Strength MPa 16000
Flexural Modulus psi 450000
Compressive Strength psi D695 18000
IZOD Impact Strength Notched kJ.m² D256 0.3
Thermal PropertiesUnitsASTMResults
Coeffcient of Linear Thermal Expansion x10⁻⁵/K C177 3.9
Heat Deflection Temp at 264 psi °F 205
Electrical PropertiesUnitsASTMResults
Surface Resistivity @60 Hz ohms/sq D257
Volume Resistivity, 50% RH ohm-cm D250
Optical PropertiesUnitsASTMResults
Luminous Transmittance % D1003 92.0
Refractive Index % D542 1.49

Applications

  • Hockey rinks
  • Arena

 

Advantages

  • Conforms to ASTM F-1703 for Hockey Rink Glazing
  • Exceptional optical clarity
  • Little to no low angle distortion
  • Lightweight – half the weight of glass
  • Fabricates just like standard cell cast acrylic

Grades

NOTE: Several grades of this material are available. For additional information regarding this plastic, contact your Emco Industrial Plastics representative or call 973-862-4148.

Downloads

Copyright © 2016 - 2017 Emco Industrial Plastics