Thomas COVID Supplier BadgeDisplaysResourcesCOVID-19 SUPPLIESGalleryGet a Quote

Nylatron® LFG PA6 takes the performance of Nylatron® LIG PA6 and adds FDA compliance for appplications where food contact is possible.  Food packaging and processing equipment users can now benefit from the benefits of this material.

Do you need Fabrication or Machining for Nylatron LFG PA6?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name
Polyamide

Available In
Sheet, Rod

Certifications
3A-Dairy Compliant, FDA Compliant

Start Your Quote

Send us a message:

*Required Fields

Gallery

Technical Information

Stock Products Properties Applications Advantages

Stock Products

TypeSizeLengthColor
Sheet 1/16″ – 2″ TH 12″ x 24″, 24″ x 48″, 12″ x 48″ Natural
Rod 3/16″ – 2″ DIA 96″ Natural

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.

Properties

Physical PropertiesUnitsASTMResults
Specific Gravity g/cc D792 1.14
Water Absorption. 24 hrs % D570 0.30
Mechanical PropertiesUnitsASTMResults
Elongation @ Break, 73°F % D638 50
Flexural Strength, 73°F psi D790 15,000
Flexural Modulus, 73°F ksi D790 525
Compressive Strength @10% psi D695 13,500
Flexural Yield Strength psi D790 15,000
Rockwell Hardness M scale D785 85
Compressive Modulous ksi D695 330
Tensile Strength psi D638 9,900
Thermal PropertiesUnitsASTMResults
Maximum Service Temperature °F 220
Melting Point °F D3418 420
Deflection Temperature °F D648 200
Electrical PropertiesUnitsASTMResults
Service Resistivity per Square ohm D257 NA
NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.

Applications

  • Bearings
  • Rollers
  • Wheels
  • Wear Components
  • Wear Pads
  • Gears

Advantages

  • Good mechanical and electrical properties
  • Ideal balance of strength and toughness
  • Cast as finished parts and near net shapes
  • Internally lubricated
  • Heat Stabilized
Copyright © 2016 - 2024 Emco Industrial Plastics