DisplaysResourcesSpecialsGalleryGet a Quote

For applications requiring higher compressive strength and rigidity, 30% glass reinforced Nylon 6/6 is also available. It is available in diameters ranging from 10mm to 150mm (or .394″ to 5.910″ in meter lengths).

Do you need Fabrication or Machining for Nylatron GF30 PA66?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name
Polyamide

Available In
Sheet, Rod

Start Your Quote

Send us a message:

Gallery

Technical Information

Stock Products Properties Applications Advantages

Stock Products

TypeSizeLengthColor
Sheet 1/16″ – 2″ TH 12″ x 24″, 24″ x 48″, 12″ x 48″ Greyish Black
Rod 10mm – 150mm DIA 96″ Greyish Black

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.

Properties

Physical PropertiesUnitsASTMResults
Specific Gravity g/cc D792 1.29
Water Absorption. 24 hrs % D570 0.30
Mechanical PropertiesUnitsASTMResults
Elongation @ Break, 73°F % D638 5.0
Flexural Strength, 73°F psi D790 21,000
Flexural Modulus, 73°F ksi D790 650
Compressive Strength @10% psi D695 18,000
Shear Strength psi psi N/A
Rockwell Hardness M scale D785 75
Coefficient of Friction D696 N/A
Tensile Strength psi D638 13,500
Thermal PropertiesUnitsASTMResults
Long Term °F UL746B 220
Melting Point °F D3418 500
Flammability UL94 V-2
Electrical PropertiesUnitsASTMResults
Dielectric Strength kV/in D149 350
NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.

Applications

  • Bearings
  • Rollers
  • Wheels
  • Wear Components
  • Wear Pads
  • Gears

Advantages

  • Broad size availability
  • Good mechanical and electrical properties
  • Ideal balance of strength and stiffness
  • Cast as finished parts and near net shapes
Copyright © 2016 - 2017 Emco Industrial Plastics