DisplaysResourcesSpecialsGalleryGet a Quote

Fluorosint® MT-01 PTFE is an extreme grade developed specifically for applications where the benefits of PTFE-based materials also require strength, stiffness and stability. Fluorosint® MT-01 PTFE delivers high mechanical performance at elevated temperature and as a result is often specified in seat, seal and wear applications where extreme conditions are present.

Do you need Fabrication or Machining for Fluorosint MT-01 Enhanced PTFE?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name
Polytetrafluoroethylene

Available In
Sheet, Rod, Tube

Start Your Quote

Send us a message:

Gallery

Technical Information

Stock Products Properties Applications Advantages Grades

Stock Products

TypeSizeLengthColor
Sheet 6.35-76.20mm Std sizes CTS Dark Grey
Rod Dia. 12.70-222.25mm Std sizes CTS Dark Grey
Tube O.D. 31.75-304.80mm Std sizes CTS Dark Grey

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.

Properties

Physical PropertiesUnitsASTMResults
Density lb/in³ D792 0.082
Water Absorption, 24 hrs % D570 0.1
Mechanical PropertiesUnitsASTMResults
Tensile Strength psi D638 2100
Tensile Modulus psi D638 326000
Tensile Elongation @Break % D638 40
Flexural Strength psi D790 4000
Flexural Modulus psi D790 488000
Compressive Strength psi D695 3400
Compressive Modulus psi D695 250000
Hardness, Rockwell D785 R74
IZOD Impact Strength Notched ft-lb/in D256 0.8
Thermal PropertiesUnitsASTMResults
Coeffcient of Linear Thermal Expansion x 10^-5 in./in./°F D256 3
Heat Deflection Temp at 264 psi °F 200
Melting Temperature °F D3418 621
Max Operating Temp. °F 600
Electrical PropertiesUnitsASTMResults
Dielectric Strength. 1/8″ th. V/mil D149 200
Dielectric Constant @1 MHz D150 2.65
Dissipation Factor@1 MHz D150 0.008
Surface Resistivity @60 Hz ohms/sq D257 >10^5

Applications

  • High temperature seals
  • Linear guides
  • Wear bands
  • Ovens and dryers

Advantages

  • Low coefficient of thermal expansion
  • High load capability
  • Superior deformation under load
  • Continuous use temperatures to 500F
  • Chemical resistance parallels PTFE

Grades

  • Fluorosint® 500
  • Fluorosint® 207
  • Fluorosint® HPV
Copyright © 2016 - 2017 Emco Industrial Plastics