DisplaysResourcesSpecialsGalleryGet a Quote

Boltaron® 1050E Type 1 PVC is an extruded, corrosion resistant, fire rated sheet with normal impact resistance for fabricating, machining and thermoforming applications. Because it is a monolithic structure that is extruded to desired thicknesses (not bonded laminations) it is not subject to delamination.

Since Boltaron® 1050E is also inert to harsh chemicals across the entire pH range, it is especially suited to applications in which acids and caustics are handled. And because it does not ionize like stainless steel and high alloys, it is also ideal for applications involving ultrapure water, reagent-grade chemicals or other contamination-sensitive products.

Boltaron® 1050E sheet is offered in lengths to 96 in. (2438 mm), widths to 48 in. (1219 mm) and thicknesses from .060 to 1 in. (1.52 to 25.4 mm), as well as in custom blank sizes. Smooth on both sides and free of inclusions, it is available from stock in dark gray, and offered in custom colors, custom sizes, and/or with poly masking (low minimums).

The sheet carries a UL 94 V-0 fire rating and conforms to ASTM D-1784 standards, making it suitable for a wide range of application requirements. Boltaron® 1050E is readily sawn, drilled, tapped, routed and otherwise machined using conventional tools, and can be brake formed (thinner gauges), heat welded and adhesive bonded and mechanically fastened, allowing rapid fabrication of a broad range of high-integrity parts and assemblies.

Do you need Fabrication or Machining for Boltaron 1050E?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name
Polyvinyl Chloride

Available In
Sheet

Certifications
ITAR Registered

Start Your Quote

Send us a message:

*Required Fields

Gallery

Technical Information

Stock Products Properties Applications Advantages Grades

Stock Products

TypeSizeLengthColor
Sheet .060″-1″ 48” x 96” Dark Gray, White, Black, Custom colors available

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.

Properties

Physical PropertiesUnitsASTMResults
Density g/cm^3 D792 1.37
Mechanical PropertiesUnitsASTMResults
Tensile Strength @ yield psi D638 7400
Tensile Elongation @Break % D638 132
Flexural Strength MPa D790 12000
Flexural Modulus psi 4.2×10^5
Compressive Strength psi D695 10830
Hardness, Rockwell 116
IZOD Impact Strength Notched kJ.m^2 D785 1.0-3.0
Thermal PropertiesUnitsASTMResults
Coeffcient of Linear Thermal Expansion x10^-5/K 2.95×10^5
Heat Deflection Temp at 264 psi °F C177 165
Thermal Conductivity W/mK C177 0.72
Flammability Rating V-0
Electrical PropertiesUnitsASTMResults
Dielectric Strength. 1/8″ th. kV/mm D149 552
Dielectric Constant D150 2.91
Dissipation Factor@1 MHz D150 0.018
Volume Resistivity, 50% RH ohm-cm D257 1.48

Applications

  • Fume hoods & ducts
  • Machined parts
  • Fume scrubbers
  • Acid etching machines
  • Acid tanks & linings

Advantages

  • Solid, monolithic strength
  • Free of pits, voids, & inclusions
  • Extreme chemical resistance

Grades

  • Boltaron® 1050
Copyright © 2016 - 2017 Emco Industrial Plastics