DisplaysResourcesSpecialsGalleryGet a Quote

Boltaron® 1050 sheet is a monolithic Type 1 PVC sheet that is free of pits, voids and inclusions, and not subject to delamination associated with competitive heavy gauge sheet.

It is inert to harsh chemicals across the entire pH range, making it suitable for applications in which acids and caustics are handled. Since it does not ionize like stainless steel and high alloys, it is also ideal for applications involving ultrapure water, reagent-grade chemicals or other contamination-sensitive products.

Boltaron® 1050 sheet is offered in lengths to 96 in. (2438 mm), widths to 48 in. (1219 mm) and thicknesses from .032 to 4 in. (0.81 to 102 mm). Smooth on both sides, it is available from stock in dark gray (no minimums), and in white and black (low minimums). It is also available in custom colors, custom textures and custom sizes, and/or with poly masking (low minimums).

The sheet carries a UL 94 V-0 fire rating and conforms to ASTM D-1784 standards, conforming to a wide range of application requirements. Boltaron® 1050 is readily sawn, drilled, tapped, routed and otherwise machined using conventional tools, and can be brake formed (thinner gauges), heat welded, adhesive bonded and mechanically fastened, allowing rapid fabrication of a broad range of high-integrity parts and assemblies.

Do you need Fabrication or Machining for Boltaron 1050?

Contact us today for your fabrication and machining needs!

Request Fabrication/Machining Services
At a Glance

Generic Name
Polyvinyl Chloride

Available In
Sheet

Certifications
ITAR Registered

Start Your Quote

Send us a message:

*Required Fields

Gallery

Technical Information

Stock Products Properties Applications Advantages Grades

Stock Products

TypeSizeLengthColor
Sheet .032″-4″ 48” x 96” Dark Gray

Give us your cut-to-size dimensions. We will precision-cut these plastics to your exact size. Additional sizes and colors available upon request.

Properties

Physical PropertiesUnitsASTMResults
Density g/cm^3 D792 1.37
Mechanical PropertiesUnitsASTMResults
Tensile Strength @ yield psi D638 7400
Tensile Elongation @Break % D638 132
Flexural Strength MPa D790 12000
Flexural Modulus psi 4.2×10^5
Compressive Strength psi D695 10830
Hardness, Rockwell 116
IZOD Impact Strength Notched kJ.m^2 D785 1.0-3.0
Thermal PropertiesUnitsASTMResults
Coeffcient of Linear Thermal Expansion x10^-5/K 2.95×10^5
Heat Deflection Temp at 264 psi °F C177 165
Thermal Conductivity W/mK C177 0.72
Flammability Rating V-0
Electrical PropertiesUnitsASTMResults
Dielectric Strength. 1/8″ th. kV/mm D149 552
Dielectric Constant D150 2.91
Dissipation Factor@1 MHz D150 0.018
Volume Resistivity, 50% RH ohm-cm D257 1.48

NOTE: The property values presented above are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers’ complete material property datasheets. All values at 73°F (23°C) unless otherwise noted.

Applications

  • Fume hoods & ducts
  • Machined parts
  • Fume scrubbers
  • Acid etching machines
  • Acid tanks & linings

Advantages

  • Solid, monolithic strength
  • Free of pits, voids, & inclusions
  • Extreme chemical resistance

Grades

  • Boltaron® 1050E
Copyright © 2016 - 2017 Emco Industrial Plastics